MINI Sh3ll
/* pp.h
*
* Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
* 2002, 2003, 2004, 2005, 2006, 2007, 2008 by Larry Wall and others
*
* You may distribute under the terms of either the GNU General Public
* License or the Artistic License, as specified in the README file.
*
*/
#define PP(s) OP * Perl_##s(pTHX)
/*
=for apidoc_section $stack
=for apidoc AmnU||SP
Stack pointer. This is usually handled by C<xsubpp>. See C<L</dSP>> and
C<SPAGAIN>.
=for apidoc AmnU||MARK
Stack marker variable for the XSUB. See C<L</dMARK>>.
=for apidoc Am|void|PUSHMARK|SP
Opening bracket for arguments on a callback. See C<L</PUTBACK>> and
L<perlcall>.
=for apidoc Amns||dSP
Declares a local copy of perl's stack pointer for the XSUB, available via
the C<SP> macro. See C<L</SP>>.
=for apidoc ms||djSP
Declare Just C<SP>. This is actually identical to C<dSP>, and declares
a local copy of perl's stack pointer, available via the C<SP> macro.
See C<L<perlapi/SP>>. (Available for backward source code compatibility with
the old (Perl 5.005) thread model.)
=for apidoc Amns||dMARK
Declare a stack marker variable, C<mark>, for the XSUB. See C<L</MARK>> and
C<L</dORIGMARK>>.
=for apidoc Amns||dORIGMARK
Saves the original stack mark for the XSUB. See C<L</ORIGMARK>>.
=for apidoc AmnU||ORIGMARK
The original stack mark for the XSUB. See C<L</dORIGMARK>>.
=for apidoc Amns||SPAGAIN
Refetch the stack pointer. Used after a callback. See L<perlcall>.
=cut */
#undef SP /* Solaris 2.7 i386 has this in /usr/include/sys/reg.h */
#define SP sp
#define MARK mark
/*
=for apidoc Amns||TARG
C<TARG> is short for "target". It is an entry in the pad that an OPs
C<op_targ> refers to. It is scratchpad space, often used as a return
value for the OP, but some use it for other purposes.
=cut
*/
#define TARG targ
#define PUSHMARK(p) \
STMT_START { \
I32 * mark_stack_entry; \
if (UNLIKELY((mark_stack_entry = ++PL_markstack_ptr) \
== PL_markstack_max)) \
mark_stack_entry = markstack_grow(); \
*mark_stack_entry = (I32)((p) - PL_stack_base); \
DEBUG_s(DEBUG_v(PerlIO_printf(Perl_debug_log, \
"MARK push %p %" IVdf "\n", \
PL_markstack_ptr, (IV)*mark_stack_entry))); \
} STMT_END
#define TOPMARK Perl_TOPMARK(aTHX)
#define POPMARK Perl_POPMARK(aTHX)
#define INCMARK \
STMT_START { \
DEBUG_s(DEBUG_v(PerlIO_printf(Perl_debug_log, \
"MARK inc %p %" IVdf "\n", \
(PL_markstack_ptr+1), (IV)*(PL_markstack_ptr+1)))); \
PL_markstack_ptr++; \
} STMT_END
#define dSP SV **sp = PL_stack_sp
#define djSP dSP
#define dMARK SV **mark = PL_stack_base + POPMARK
#define dORIGMARK const I32 origmark = (I32)(mark - PL_stack_base)
#define ORIGMARK (PL_stack_base + origmark)
#define SPAGAIN sp = PL_stack_sp
#define MSPAGAIN STMT_START { sp = PL_stack_sp; mark = ORIGMARK; } STMT_END
#define GETTARGETSTACKED targ = (PL_op->op_flags & OPf_STACKED ? POPs : PAD_SV(PL_op->op_targ))
#define dTARGETSTACKED SV * GETTARGETSTACKED
#define GETTARGET targ = PAD_SV(PL_op->op_targ)
/*
=for apidoc Amns||dTARGET
Declare that this function uses C<TARG>
=cut
*/
#define dTARGET SV * GETTARGET
#define GETATARGET targ = (PL_op->op_flags & OPf_STACKED ? sp[-1] : PAD_SV(PL_op->op_targ))
#define dATARGET SV * GETATARGET
#define dTARG SV *targ
#define NORMAL PL_op->op_next
#define DIE return Perl_die
/*
=for apidoc Amns||PUTBACK
Closing bracket for XSUB arguments. This is usually handled by C<xsubpp>.
See C<L</PUSHMARK>> and L<perlcall> for other uses.
=for apidoc Amn|SV*|POPs
Pops an SV off the stack.
=for apidoc Amn|char*|POPp
Pops a string off the stack.
=for apidoc Amn|char*|POPpx
Pops a string off the stack. Identical to POPp. There are two names for
historical reasons.
=for apidoc Amn|char*|POPpbytex
Pops a string off the stack which must consist of bytes i.e. characters < 256.
=for apidoc Amn|NV|POPn
Pops a double off the stack.
=for apidoc Amn|IV|POPi
Pops an integer off the stack.
=for apidoc Amn|UV|POPu
Pops an unsigned integer off the stack.
=for apidoc Amn|long|POPl
Pops a long off the stack.
=for apidoc Amn|long|POPul
Pops an unsigned long off the stack.
=cut
*/
#define PUTBACK PL_stack_sp = sp
#define RETURN return (PUTBACK, NORMAL)
#define RETURNOP(o) return (PUTBACK, o)
#define RETURNX(x) return (x, PUTBACK, NORMAL)
#define POPs (*sp--)
#define POPp POPpx
#define POPpx (SvPVx_nolen(POPs))
#define POPpconstx (SvPVx_nolen_const(POPs))
#define POPpbytex (SvPVbytex_nolen(POPs))
#define POPn (SvNVx(POPs))
#define POPi ((IV)SvIVx(POPs))
#define POPu ((UV)SvUVx(POPs))
#define POPl ((long)SvIVx(POPs))
#define POPul ((unsigned long)SvIVx(POPs))
#define TOPs (*sp)
#define TOPm1s (*(sp-1))
#define TOPp1s (*(sp+1))
#define TOPp TOPpx
#define TOPpx (SvPV_nolen(TOPs))
#define TOPn (SvNV(TOPs))
#define TOPi ((IV)SvIV(TOPs))
#define TOPu ((UV)SvUV(TOPs))
#define TOPl ((long)SvIV(TOPs))
#define TOPul ((unsigned long)SvUV(TOPs))
/* Go to some pains in the rare event that we must extend the stack. */
/*
=for apidoc Am|void|EXTEND|SP|SSize_t nitems
Used to extend the argument stack for an XSUB's return values. Once
used, guarantees that there is room for at least C<nitems> to be pushed
onto the stack.
=for apidoc Am|void|PUSHs|SV* sv
Push an SV onto the stack. The stack must have room for this element.
Does not handle 'set' magic. Does not use C<TARG>. See also
C<L</PUSHmortal>>, C<L</XPUSHs>>, and C<L</XPUSHmortal>>.
=for apidoc Am|void|PUSHp|char* str|STRLEN len
Push a string onto the stack. The stack must have room for this element.
The C<len> indicates the length of the string. Handles 'set' magic. Uses
C<TARG>, so C<dTARGET> or C<dXSTARG> should be called to declare it. Do not
call multiple C<TARG>-oriented macros to return lists from XSUB's - see
C<L</mPUSHp>> instead. See also C<L</XPUSHp>> and C<L</mXPUSHp>>.
=for apidoc Am|void|PUSHn|NV nv
Push a double onto the stack. The stack must have room for this element.
Handles 'set' magic. Uses C<TARG>, so C<dTARGET> or C<dXSTARG> should be
called to declare it. Do not call multiple C<TARG>-oriented macros to
return lists from XSUB's - see C<L</mPUSHn>> instead. See also C<L</XPUSHn>>
and C<L</mXPUSHn>>.
=for apidoc Am|void|PUSHi|IV iv
Push an integer onto the stack. The stack must have room for this element.
Handles 'set' magic. Uses C<TARG>, so C<dTARGET> or C<dXSTARG> should be
called to declare it. Do not call multiple C<TARG>-oriented macros to
return lists from XSUB's - see C<L</mPUSHi>> instead. See also C<L</XPUSHi>>
and C<L</mXPUSHi>>.
=for apidoc Am|void|PUSHu|UV uv
Push an unsigned integer onto the stack. The stack must have room for this
element. Handles 'set' magic. Uses C<TARG>, so C<dTARGET> or C<dXSTARG>
should be called to declare it. Do not call multiple C<TARG>-oriented
macros to return lists from XSUB's - see C<L</mPUSHu>> instead. See also
C<L</XPUSHu>> and C<L</mXPUSHu>>.
=for apidoc Am|void|XPUSHs|SV* sv
Push an SV onto the stack, extending the stack if necessary. Does not
handle 'set' magic. Does not use C<TARG>. See also C<L</XPUSHmortal>>,
C<PUSHs> and C<PUSHmortal>.
=for apidoc Am|void|XPUSHp|char* str|STRLEN len
Push a string onto the stack, extending the stack if necessary. The C<len>
indicates the length of the string. Handles 'set' magic. Uses C<TARG>, so
C<dTARGET> or C<dXSTARG> should be called to declare it. Do not call
multiple C<TARG>-oriented macros to return lists from XSUB's - see
C<L</mXPUSHp>> instead. See also C<L</PUSHp>> and C<L</mPUSHp>>.
=for apidoc Am|void|XPUSHn|NV nv
Push a double onto the stack, extending the stack if necessary. Handles
'set' magic. Uses C<TARG>, so C<dTARGET> or C<dXSTARG> should be called to
declare it. Do not call multiple C<TARG>-oriented macros to return lists
from XSUB's - see C<L</mXPUSHn>> instead. See also C<L</PUSHn>> and
C<L</mPUSHn>>.
=for apidoc Am|void|XPUSHi|IV iv
Push an integer onto the stack, extending the stack if necessary. Handles
'set' magic. Uses C<TARG>, so C<dTARGET> or C<dXSTARG> should be called to
declare it. Do not call multiple C<TARG>-oriented macros to return lists
from XSUB's - see C<L</mXPUSHi>> instead. See also C<L</PUSHi>> and
C<L</mPUSHi>>.
=for apidoc Am|void|XPUSHu|UV uv
Push an unsigned integer onto the stack, extending the stack if necessary.
Handles 'set' magic. Uses C<TARG>, so C<dTARGET> or C<dXSTARG> should be
called to declare it. Do not call multiple C<TARG>-oriented macros to
return lists from XSUB's - see C<L</mXPUSHu>> instead. See also C<L</PUSHu>> and
C<L</mPUSHu>>.
=for apidoc Am|void|mPUSHs|SV* sv
Push an SV onto the stack and mortalizes the SV. The stack must have room
for this element. Does not use C<TARG>. See also C<L</PUSHs>> and
C<L</mXPUSHs>>.
=for apidoc Amn|void|PUSHmortal
Push a new mortal SV onto the stack. The stack must have room for this
element. Does not use C<TARG>. See also C<L</PUSHs>>, C<L</XPUSHmortal>> and
C<L</XPUSHs>>.
=for apidoc Am|void|mPUSHp|char* str|STRLEN len
Push a string onto the stack. The stack must have room for this element.
The C<len> indicates the length of the string. Does not use C<TARG>.
See also C<L</PUSHp>>, C<L</mXPUSHp>> and C<L</XPUSHp>>.
=for apidoc Am|void|mPUSHn|NV nv
Push a double onto the stack. The stack must have room for this element.
Does not use C<TARG>. See also C<L</PUSHn>>, C<L</mXPUSHn>> and C<L</XPUSHn>>.
=for apidoc Am|void|mPUSHi|IV iv
Push an integer onto the stack. The stack must have room for this element.
Does not use C<TARG>. See also C<L</PUSHi>>, C<L</mXPUSHi>> and C<L</XPUSHi>>.
=for apidoc Am|void|mPUSHu|UV uv
Push an unsigned integer onto the stack. The stack must have room for this
element. Does not use C<TARG>. See also C<L</PUSHu>>, C<L</mXPUSHu>> and
C<L</XPUSHu>>.
=for apidoc Am|void|mXPUSHs|SV* sv
Push an SV onto the stack, extending the stack if necessary and mortalizes
the SV. Does not use C<TARG>. See also C<L</XPUSHs>> and C<L</mPUSHs>>.
=for apidoc Amn|void|XPUSHmortal
Push a new mortal SV onto the stack, extending the stack if necessary.
Does not use C<TARG>. See also C<L</XPUSHs>>, C<L</PUSHmortal>> and
C<L</PUSHs>>.
=for apidoc Am|void|mXPUSHp|char* str|STRLEN len
Push a string onto the stack, extending the stack if necessary. The C<len>
indicates the length of the string. Does not use C<TARG>. See also
C<L</XPUSHp>>, C<mPUSHp> and C<PUSHp>.
=for apidoc Am|void|mXPUSHn|NV nv
Push a double onto the stack, extending the stack if necessary.
Does not use C<TARG>. See also C<L</XPUSHn>>, C<L</mPUSHn>> and C<L</PUSHn>>.
=for apidoc Am|void|mXPUSHi|IV iv
Push an integer onto the stack, extending the stack if necessary.
Does not use C<TARG>. See also C<L</XPUSHi>>, C<L</mPUSHi>> and C<L</PUSHi>>.
=for apidoc Am|void|mXPUSHu|UV uv
Push an unsigned integer onto the stack, extending the stack if necessary.
Does not use C<TARG>. See also C<L</XPUSHu>>, C<L</mPUSHu>> and C<L</PUSHu>>.
=cut
*/
/* EXTEND_HWM_SET: note the high-water-mark to which the stack has been
* requested to be extended (which is likely to be less than PL_stack_max)
*/
#if defined DEBUGGING && !defined DEBUGGING_RE_ONLY
# define EXTEND_HWM_SET(p, n) \
STMT_START { \
SSize_t ix = (p) - PL_stack_base + (n); \
if (ix > PL_curstackinfo->si_stack_hwm) \
PL_curstackinfo->si_stack_hwm = ix; \
} STMT_END
#else
# define EXTEND_HWM_SET(p, n) NOOP
#endif
/* _EXTEND_SAFE_N(n): private helper macro for EXTEND().
* Tests whether the value of n would be truncated when implicitly cast to
* SSize_t as an arg to stack_grow(). If so, sets it to -1 instead to
* trigger a panic. It will be constant folded on platforms where this
* can't happen.
*/
#define _EXTEND_SAFE_N(n) \
(sizeof(n) > sizeof(SSize_t) && ((SSize_t)(n) != (n)) ? -1 : (n))
#ifdef STRESS_REALLOC
# define EXTEND_SKIP(p, n) EXTEND_HWM_SET(p, n)
# define EXTEND(p,n) STMT_START { \
sp = stack_grow(sp,p,_EXTEND_SAFE_N(n)); \
PERL_UNUSED_VAR(sp); \
} STMT_END
/* Same thing, but update mark register too. */
# define MEXTEND(p,n) STMT_START { \
const SSize_t markoff = mark - PL_stack_base; \
sp = stack_grow(sp,p,_EXTEND_SAFE_N(n)); \
mark = PL_stack_base + markoff; \
PERL_UNUSED_VAR(sp); \
} STMT_END
#else
/* _EXTEND_NEEDS_GROW(p,n): private helper macro for EXTEND().
* Tests to see whether n is too big and we need to grow the stack. Be
* very careful if modifying this. There are many ways to get things wrong
* (wrapping, truncating etc) that could cause a false negative and cause
* the call to stack_grow() to be skipped. On the other hand, false
* positives are safe.
* Bear in mind that sizeof(p) may be less than, equal to, or greater
* than sizeof(n), and while n is documented to be signed, someone might
* pass an unsigned value or expression. In general don't use casts to
* avoid warnings; instead expect the caller to fix their code.
* It is legal for p to be greater than PL_stack_max.
* If the allocated stack is already very large but current usage is
* small, then PL_stack_max - p might wrap round to a negative value, but
* this just gives a safe false positive
*/
# define _EXTEND_NEEDS_GROW(p,n) ((n) < 0 || PL_stack_max - (p) < (n))
/* EXTEND_SKIP(): used for where you would normally call EXTEND(), but
* you know for sure that a previous op will have already extended the
* stack sufficiently. For example pp_enteriter ensures that there
* is always at least 1 free slot, so pp_iter can return &PL_sv_yes/no
* without checking each time. Calling EXTEND_SKIP() defeats the HWM
* debugging mechanism which would otherwise whine
*/
# define EXTEND_SKIP(p, n) STMT_START { \
EXTEND_HWM_SET(p, n); \
assert(!_EXTEND_NEEDS_GROW(p,n)); \
} STMT_END
# define EXTEND(p,n) STMT_START { \
EXTEND_HWM_SET(p, n); \
if (UNLIKELY(_EXTEND_NEEDS_GROW(p,n))) { \
sp = stack_grow(sp,p,_EXTEND_SAFE_N(n)); \
PERL_UNUSED_VAR(sp); \
} } STMT_END
/* Same thing, but update mark register too. */
# define MEXTEND(p,n) STMT_START { \
EXTEND_HWM_SET(p, n); \
if (UNLIKELY(_EXTEND_NEEDS_GROW(p,n))) { \
const SSize_t markoff = mark - PL_stack_base;\
sp = stack_grow(sp,p,_EXTEND_SAFE_N(n)); \
mark = PL_stack_base + markoff; \
PERL_UNUSED_VAR(sp); \
} } STMT_END
#endif
/* set TARG to the IV value i. If do_taint is false,
* assume that PL_tainted can never be true */
#define TARGi(i, do_taint) \
STMT_START { \
IV TARGi_iv = i; \
if (LIKELY( \
((SvFLAGS(TARG) & (SVTYPEMASK|SVf_THINKFIRST|SVf_IVisUV)) == SVt_IV) \
& (do_taint ? !TAINT_get : 1))) \
{ \
/* Cheap SvIOK_only(). \
* Assert that flags which SvIOK_only() would test or \
* clear can't be set, because we're SVt_IV */ \
assert(!(SvFLAGS(TARG) & \
(SVf_OOK|SVf_UTF8|(SVf_OK & ~(SVf_IOK|SVp_IOK))))); \
SvFLAGS(TARG) |= (SVf_IOK|SVp_IOK); \
/* SvIV_set() where sv_any points to head */ \
TARG->sv_u.svu_iv = TARGi_iv; \
} \
else \
sv_setiv_mg(targ, TARGi_iv); \
} STMT_END
/* set TARG to the UV value u. If do_taint is false,
* assume that PL_tainted can never be true */
#define TARGu(u, do_taint) \
STMT_START { \
UV TARGu_uv = u; \
if (LIKELY( \
((SvFLAGS(TARG) & (SVTYPEMASK|SVf_THINKFIRST|SVf_IVisUV)) == SVt_IV) \
& (do_taint ? !TAINT_get : 1) \
& (TARGu_uv <= (UV)IV_MAX))) \
{ \
/* Cheap SvIOK_only(). \
* Assert that flags which SvIOK_only() would test or \
* clear can't be set, because we're SVt_IV */ \
assert(!(SvFLAGS(TARG) & \
(SVf_OOK|SVf_UTF8|(SVf_OK & ~(SVf_IOK|SVp_IOK))))); \
SvFLAGS(TARG) |= (SVf_IOK|SVp_IOK); \
/* SvIV_set() where sv_any points to head */ \
TARG->sv_u.svu_iv = TARGu_uv; \
} \
else \
sv_setuv_mg(targ, TARGu_uv); \
} STMT_END
/* set TARG to the NV value n. If do_taint is false,
* assume that PL_tainted can never be true */
#define TARGn(n, do_taint) \
STMT_START { \
NV TARGn_nv = n; \
if (LIKELY( \
((SvFLAGS(TARG) & (SVTYPEMASK|SVf_THINKFIRST)) == SVt_NV) \
& (do_taint ? !TAINT_get : 1))) \
{ \
/* Cheap SvNOK_only(). \
* Assert that flags which SvNOK_only() would test or \
* clear can't be set, because we're SVt_NV */ \
assert(!(SvFLAGS(TARG) & \
(SVf_OOK|SVf_UTF8|(SVf_OK & ~(SVf_NOK|SVp_NOK))))); \
SvFLAGS(TARG) |= (SVf_NOK|SVp_NOK); \
SvNV_set(TARG, TARGn_nv); \
} \
else \
sv_setnv_mg(targ, TARGn_nv); \
} STMT_END
#define PUSHs(s) (*++sp = (s))
#define PUSHTARG STMT_START { SvSETMAGIC(TARG); PUSHs(TARG); } STMT_END
#define PUSHp(p,l) STMT_START { sv_setpvn(TARG, (p), (l)); PUSHTARG; } STMT_END
#define PUSHn(n) STMT_START { TARGn(n,1); PUSHs(TARG); } STMT_END
#define PUSHi(i) STMT_START { TARGi(i,1); PUSHs(TARG); } STMT_END
#define PUSHu(u) STMT_START { TARGu(u,1); PUSHs(TARG); } STMT_END
#define XPUSHs(s) STMT_START { EXTEND(sp,1); *++sp = (s); } STMT_END
#define XPUSHTARG STMT_START { SvSETMAGIC(TARG); XPUSHs(TARG); } STMT_END
#define XPUSHp(p,l) STMT_START { sv_setpvn(TARG, (p), (l)); XPUSHTARG; } STMT_END
#define XPUSHn(n) STMT_START { TARGn(n,1); XPUSHs(TARG); } STMT_END
#define XPUSHi(i) STMT_START { TARGi(i,1); XPUSHs(TARG); } STMT_END
#define XPUSHu(u) STMT_START { TARGu(u,1); XPUSHs(TARG); } STMT_END
#define XPUSHundef STMT_START { SvOK_off(TARG); XPUSHs(TARG); } STMT_END
#define mPUSHs(s) PUSHs(sv_2mortal(s))
#define PUSHmortal PUSHs(sv_newmortal())
#define mPUSHp(p,l) PUSHs(newSVpvn_flags((p), (l), SVs_TEMP))
#define mPUSHn(n) sv_setnv(PUSHmortal, (NV)(n))
#define mPUSHi(i) sv_setiv(PUSHmortal, (IV)(i))
#define mPUSHu(u) sv_setuv(PUSHmortal, (UV)(u))
#define mXPUSHs(s) XPUSHs(sv_2mortal(s))
#define XPUSHmortal XPUSHs(sv_newmortal())
#define mXPUSHp(p,l) STMT_START { EXTEND(sp,1); mPUSHp((p), (l)); } STMT_END
#define mXPUSHn(n) STMT_START { EXTEND(sp,1); mPUSHn(n); } STMT_END
#define mXPUSHi(i) STMT_START { EXTEND(sp,1); mPUSHi(i); } STMT_END
#define mXPUSHu(u) STMT_START { EXTEND(sp,1); mPUSHu(u); } STMT_END
#define SETs(s) (*sp = s)
#define SETTARG STMT_START { SvSETMAGIC(TARG); SETs(TARG); } STMT_END
#define SETp(p,l) STMT_START { sv_setpvn(TARG, (p), (l)); SETTARG; } STMT_END
#define SETn(n) STMT_START { TARGn(n,1); SETs(TARG); } STMT_END
#define SETi(i) STMT_START { TARGi(i,1); SETs(TARG); } STMT_END
#define SETu(u) STMT_START { TARGu(u,1); SETs(TARG); } STMT_END
#define dTOPss SV *sv = TOPs
#define dPOPss SV *sv = POPs
#define dTOPnv NV value = TOPn
#define dPOPnv NV value = POPn
#define dPOPnv_nomg NV value = (sp--, SvNV_nomg(TOPp1s))
#define dTOPiv IV value = TOPi
#define dPOPiv IV value = POPi
#define dTOPuv UV value = TOPu
#define dPOPuv UV value = POPu
#define dPOPXssrl(X) SV *right = POPs; SV *left = CAT2(X,s)
#define dPOPXnnrl(X) NV right = POPn; NV left = CAT2(X,n)
#define dPOPXiirl(X) IV right = POPi; IV left = CAT2(X,i)
#define USE_LEFT(sv) \
(SvOK(sv) || !(PL_op->op_flags & OPf_STACKED))
#define dPOPXiirl_ul_nomg(X) \
IV right = (sp--, SvIV_nomg(TOPp1s)); \
SV *leftsv = CAT2(X,s); \
IV left = USE_LEFT(leftsv) ? SvIV_nomg(leftsv) : 0
#define dPOPPOPssrl dPOPXssrl(POP)
#define dPOPPOPnnrl dPOPXnnrl(POP)
#define dPOPPOPiirl dPOPXiirl(POP)
#define dPOPTOPssrl dPOPXssrl(TOP)
#define dPOPTOPnnrl dPOPXnnrl(TOP)
#define dPOPTOPnnrl_nomg \
NV right = SvNV_nomg(TOPs); NV left = (sp--, SvNV_nomg(TOPs))
#define dPOPTOPiirl dPOPXiirl(TOP)
#define dPOPTOPiirl_ul_nomg dPOPXiirl_ul_nomg(TOP)
#define dPOPTOPiirl_nomg \
IV right = SvIV_nomg(TOPs); IV left = (sp--, SvIV_nomg(TOPs))
#define RETPUSHYES RETURNX(PUSHs(&PL_sv_yes))
#define RETPUSHNO RETURNX(PUSHs(&PL_sv_no))
#define RETPUSHUNDEF RETURNX(PUSHs(&PL_sv_undef))
#define RETSETYES RETURNX(SETs(&PL_sv_yes))
#define RETSETNO RETURNX(SETs(&PL_sv_no))
#define RETSETUNDEF RETURNX(SETs(&PL_sv_undef))
#define RETSETTARG STMT_START { SETTARG; RETURN; } STMT_END
#define ARGTARG PL_op->op_targ
#define MAXARG (PL_op->op_private & OPpARG4_MASK)
#define SWITCHSTACK(f,t) \
STMT_START { \
AvFILLp(f) = sp - PL_stack_base; \
PL_stack_base = AvARRAY(t); \
PL_stack_max = PL_stack_base + AvMAX(t); \
sp = PL_stack_sp = PL_stack_base + AvFILLp(t); \
PL_curstack = t; \
} STMT_END
#define EXTEND_MORTAL(n) \
STMT_START { \
SSize_t eMiX = PL_tmps_ix + (n); \
if (UNLIKELY(eMiX >= PL_tmps_max)) \
(void)Perl_tmps_grow_p(aTHX_ eMiX); \
} STMT_END
#define AMGf_noright 1
#define AMGf_noleft 2
#define AMGf_assign 4 /* op supports mutator variant, e.g. $x += 1 */
#define AMGf_unary 8
#define AMGf_numeric 0x10 /* for Perl_try_amagic_bin */
#define AMGf_want_list 0x40
#define AMGf_numarg 0x80
/* do SvGETMAGIC on the stack args before checking for overload */
#define tryAMAGICun_MG(method, flags) STMT_START { \
if ( UNLIKELY((SvFLAGS(TOPs) & (SVf_ROK|SVs_GMG))) \
&& Perl_try_amagic_un(aTHX_ method, flags)) \
return NORMAL; \
} STMT_END
#define tryAMAGICbin_MG(method, flags) STMT_START { \
if ( UNLIKELY(((SvFLAGS(TOPm1s)|SvFLAGS(TOPs)) & (SVf_ROK|SVs_GMG))) \
&& Perl_try_amagic_bin(aTHX_ method, flags)) \
return NORMAL; \
} STMT_END
#define AMG_CALLunary(sv,meth) \
amagic_call(sv,&PL_sv_undef, meth, AMGf_noright | AMGf_unary)
/* No longer used in core. Use AMG_CALLunary instead */
#define AMG_CALLun(sv,meth) AMG_CALLunary(sv, CAT2(meth,_amg))
#define tryAMAGICunTARGETlist(meth, jump) \
STMT_START { \
dSP; \
SV *tmpsv; \
SV *arg= *sp; \
U8 gimme = GIMME_V; \
if (UNLIKELY(SvAMAGIC(arg) && \
(tmpsv = amagic_call(arg, &PL_sv_undef, meth, \
AMGf_want_list | AMGf_noright \
|AMGf_unary)))) \
{ \
SPAGAIN; \
if (gimme == G_VOID) { \
NOOP; \
} \
else if (gimme == G_ARRAY) { \
SSize_t i; \
SSize_t len; \
assert(SvTYPE(tmpsv) == SVt_PVAV); \
len = av_count((AV *)tmpsv); \
(void)POPs; /* get rid of the arg */ \
EXTEND(sp, len); \
for (i = 0; i < len; ++i) \
PUSHs(av_shift((AV *)tmpsv)); \
} \
else { /* AMGf_want_scalar */ \
dATARGET; /* just use the arg's location */ \
sv_setsv(TARG, tmpsv); \
if (PL_op->op_flags & OPf_STACKED) \
sp--; \
SETTARG; \
} \
PUTBACK; \
if (jump) { \
OP *jump_o = NORMAL->op_next; \
while (jump_o->op_type == OP_NULL) \
jump_o = jump_o->op_next; \
assert(jump_o->op_type == OP_ENTERSUB); \
(void)POPMARK; \
return jump_o->op_next; \
} \
return NORMAL; \
} \
} STMT_END
/* This is no longer used anywhere in the core. You might wish to consider
calling amagic_deref_call() directly, as it has a cleaner interface. */
#define tryAMAGICunDEREF(meth) \
STMT_START { \
sv = amagic_deref_call(*sp, CAT2(meth,_amg)); \
SPAGAIN; \
} STMT_END
/* 2019: no longer used in core */
#define opASSIGN (PL_op->op_flags & OPf_STACKED)
/*
=for apidoc mnU||LVRET
True if this op will be the return value of an lvalue subroutine
=cut */
#define LVRET ((PL_op->op_private & OPpMAYBE_LVSUB) && is_lvalue_sub())
#define SvCANEXISTDELETE(sv) \
(!SvRMAGICAL(sv) \
|| !(mg = mg_find((const SV *) sv, PERL_MAGIC_tied)) \
|| ( (stash = SvSTASH(SvRV(SvTIED_obj(MUTABLE_SV(sv), mg)))) \
&& gv_fetchmethod_autoload(stash, "EXISTS", TRUE) \
&& gv_fetchmethod_autoload(stash, "DELETE", TRUE) \
) \
)
#ifdef PERL_CORE
/* These are just for Perl_tied_method(), which is not part of the public API.
Use 0x04 rather than the next available bit, to help the compiler if the
architecture can generate more efficient instructions. */
# define TIED_METHOD_MORTALIZE_NOT_NEEDED 0x04
# define TIED_METHOD_ARGUMENTS_ON_STACK 0x08
# define TIED_METHOD_SAY 0x10
/* Used in various places that need to dereference a glob or globref */
# define MAYBE_DEREF_GV_flags(sv,phlags) \
( \
(void)(phlags & SV_GMAGIC && (SvGETMAGIC(sv),0)), \
isGV_with_GP(sv) \
? (GV *)(sv) \
: SvROK(sv) && SvTYPE(SvRV(sv)) <= SVt_PVLV && \
(SvGETMAGIC(SvRV(sv)), isGV_with_GP(SvRV(sv))) \
? (GV *)SvRV(sv) \
: NULL \
)
# define MAYBE_DEREF_GV(sv) MAYBE_DEREF_GV_flags(sv,SV_GMAGIC)
# define MAYBE_DEREF_GV_nomg(sv) MAYBE_DEREF_GV_flags(sv,0)
# define FIND_RUNCV_padid_eq 1
# define FIND_RUNCV_level_eq 2
#endif
/*
* ex: set ts=8 sts=4 sw=4 et:
*/
OHA YOOOO