MINI Sh3ll
# http.tcl --
#
# Client-side HTTP for GET, POST, and HEAD commands. These routines can
# be used in untrusted code that uses the Safesock security policy.
# These procedures use a callback interface to avoid using vwait, which
# is not defined in the safe base.
#
# See the file "license.terms" for information on usage and redistribution of
# this file, and for a DISCLAIMER OF ALL WARRANTIES.
package require Tcl 8.6-
# Keep this in sync with pkgIndex.tcl and with the install directories in
# Makefiles
package provide http 2.9.5
namespace eval http {
# Allow resourcing to not clobber existing data
variable http
if {![info exists http]} {
array set http {
-accept */*
-pipeline 1
-postfresh 0
-proxyhost {}
-proxyport {}
-proxyfilter http::ProxyRequired
-repost 0
-urlencoding utf-8
-zip 1
}
# We need a useragent string of this style or various servers will
# refuse to send us compressed content even when we ask for it. This
# follows the de-facto layout of user-agent strings in current browsers.
# Safe interpreters do not have ::tcl_platform(os) or
# ::tcl_platform(osVersion).
if {[interp issafe]} {
set http(-useragent) "Mozilla/5.0\
(Windows; U;\
Windows NT 10.0)\
http/[package provide http] Tcl/[package provide Tcl]"
} else {
set http(-useragent) "Mozilla/5.0\
([string totitle $::tcl_platform(platform)]; U;\
$::tcl_platform(os) $::tcl_platform(osVersion))\
http/[package provide http] Tcl/[package provide Tcl]"
}
}
proc init {} {
# Set up the map for quoting chars. RFC3986 Section 2.3 say percent
# encode all except: "... percent-encoded octets in the ranges of
# ALPHA (%41-%5A and %61-%7A), DIGIT (%30-%39), hyphen (%2D), period
# (%2E), underscore (%5F), or tilde (%7E) should not be created by URI
# producers ..."
for {set i 0} {$i <= 256} {incr i} {
set c [format %c $i]
if {![string match {[-._~a-zA-Z0-9]} $c]} {
set map($c) %[format %.2X $i]
}
}
# These are handled specially
set map(\n) %0D%0A
variable formMap [array get map]
# Create a map for HTTP/1.1 open sockets
variable socketMapping
variable socketRdState
variable socketWrState
variable socketRdQueue
variable socketWrQueue
variable socketClosing
variable socketPlayCmd
if {[info exists socketMapping]} {
# Close open sockets on re-init. Do not permit retries.
foreach {url sock} [array get socketMapping] {
unset -nocomplain socketClosing($url)
unset -nocomplain socketPlayCmd($url)
CloseSocket $sock
}
}
# CloseSocket should have unset the socket* arrays, one element at
# a time. Now unset anything that was overlooked.
# Traces on "unset socketRdState(*)" will call CancelReadPipeline and
# cancel any queued responses.
# Traces on "unset socketWrState(*)" will call CancelWritePipeline and
# cancel any queued requests.
array unset socketMapping
array unset socketRdState
array unset socketWrState
array unset socketRdQueue
array unset socketWrQueue
array unset socketClosing
array unset socketPlayCmd
array set socketMapping {}
array set socketRdState {}
array set socketWrState {}
array set socketRdQueue {}
array set socketWrQueue {}
array set socketClosing {}
array set socketPlayCmd {}
}
init
variable urlTypes
if {![info exists urlTypes]} {
set urlTypes(http) [list 80 ::socket]
}
variable encodings [string tolower [encoding names]]
# This can be changed, but iso8859-1 is the RFC standard.
variable defaultCharset
if {![info exists defaultCharset]} {
set defaultCharset "iso8859-1"
}
# Force RFC 3986 strictness in geturl url verification?
variable strict
if {![info exists strict]} {
set strict 1
}
# Let user control default keepalive for compatibility
variable defaultKeepalive
if {![info exists defaultKeepalive]} {
set defaultKeepalive 0
}
namespace export geturl config reset wait formatQuery quoteString
namespace export register unregister registerError
# - Useful, but not exported: data, size, status, code, cleanup, error,
# meta, ncode, mapReply, init. Comments suggest that "init" can be used
# for re-initialisation, although the command is undocumented.
# - Not exported, probably should be upper-case initial letter as part
# of the internals: getTextLine, make-transformation-chunked.
}
# http::Log --
#
# Debugging output -- define this to observe HTTP/1.1 socket usage.
# Should echo any args received.
#
# Arguments:
# msg Message to output
#
if {[info command http::Log] eq {}} {proc http::Log {args} {}}
# http::register --
#
# See documentation for details.
#
# Arguments:
# proto URL protocol prefix, e.g. https
# port Default port for protocol
# command Command to use to create socket
# Results:
# list of port and command that was registered.
proc http::register {proto port command} {
variable urlTypes
set urlTypes([string tolower $proto]) [list $port $command]
}
# http::unregister --
#
# Unregisters URL protocol handler
#
# Arguments:
# proto URL protocol prefix, e.g. https
# Results:
# list of port and command that was unregistered.
proc http::unregister {proto} {
variable urlTypes
set lower [string tolower $proto]
if {![info exists urlTypes($lower)]} {
return -code error "unsupported url type \"$proto\""
}
set old $urlTypes($lower)
unset urlTypes($lower)
return $old
}
# http::config --
#
# See documentation for details.
#
# Arguments:
# args Options parsed by the procedure.
# Results:
# TODO
proc http::config {args} {
variable http
set options [lsort [array names http -*]]
set usage [join $options ", "]
if {[llength $args] == 0} {
set result {}
foreach name $options {
lappend result $name $http($name)
}
return $result
}
set options [string map {- ""} $options]
set pat ^-(?:[join $options |])$
if {[llength $args] == 1} {
set flag [lindex $args 0]
if {![regexp -- $pat $flag]} {
return -code error "Unknown option $flag, must be: $usage"
}
return $http($flag)
} else {
foreach {flag value} $args {
if {![regexp -- $pat $flag]} {
return -code error "Unknown option $flag, must be: $usage"
}
set http($flag) $value
}
}
}
# http::Finish --
#
# Clean up the socket and eval close time callbacks
#
# Arguments:
# token Connection token.
# errormsg (optional) If set, forces status to error.
# skipCB (optional) If set, don't call the -command callback. This
# is useful when geturl wants to throw an exception instead
# of calling the callback. That way, the same error isn't
# reported to two places.
#
# Side Effects:
# May close the socket.
proc http::Finish {token {errormsg ""} {skipCB 0}} {
variable socketMapping
variable socketRdState
variable socketWrState
variable socketRdQueue
variable socketWrQueue
variable socketClosing
variable socketPlayCmd
variable $token
upvar 0 $token state
global errorInfo errorCode
set closeQueue 0
if {$errormsg ne ""} {
set state(error) [list $errormsg $errorInfo $errorCode]
set state(status) "error"
}
if {[info commands ${token}EventCoroutine] ne {}} {
rename ${token}EventCoroutine {}
}
if { ($state(status) eq "timeout")
|| ($state(status) eq "error")
|| ($state(status) eq "eof")
|| ([info exists state(-keepalive)] && !$state(-keepalive))
|| ([info exists state(connection)] && ($state(connection) eq "close"))
} {
set closeQueue 1
set connId $state(socketinfo)
set sock $state(sock)
CloseSocket $state(sock) $token
} elseif {
([info exists state(-keepalive)] && $state(-keepalive))
&& ([info exists state(connection)] && ($state(connection) ne "close"))
} {
KeepSocket $token
}
if {[info exists state(after)]} {
after cancel $state(after)
unset state(after)
}
if {[info exists state(-command)] && (!$skipCB)
&& (![info exists state(done-command-cb)])} {
set state(done-command-cb) yes
if {[catch {eval $state(-command) {$token}} err] && $errormsg eq ""} {
set state(error) [list $err $errorInfo $errorCode]
set state(status) error
}
}
if { $closeQueue
&& [info exists socketMapping($connId)]
&& ($socketMapping($connId) eq $sock)
} {
http::CloseQueuedQueries $connId $token
}
}
# http::KeepSocket -
#
# Keep a socket in the persistent sockets table and connect it to its next
# queued task if possible. Otherwise leave it idle and ready for its next
# use.
#
# If $socketClosing(*), then ($state(connection) eq "close") and therefore
# this command will not be called by Finish.
#
# Arguments:
# token Connection token.
proc http::KeepSocket {token} {
variable http
variable socketMapping
variable socketRdState
variable socketWrState
variable socketRdQueue
variable socketWrQueue
variable socketClosing
variable socketPlayCmd
variable $token
upvar 0 $token state
set tk [namespace tail $token]
# Keep this socket open for another request ("Keep-Alive").
# React if the server half-closes the socket.
# Discussion is in http::geturl.
catch {fileevent $state(sock) readable [list http::CheckEof $state(sock)]}
# The line below should not be changed in production code.
# It is edited by the test suite.
set TEST_EOF 0
if {$TEST_EOF} {
# ONLY for testing reaction to server eof.
# No server timeouts will be caught.
catch {fileevent $state(sock) readable {}}
}
if { [info exists state(socketinfo)]
&& [info exists socketMapping($state(socketinfo))]
} {
set connId $state(socketinfo)
# The value "Rready" is set only here.
set socketRdState($connId) Rready
if { $state(-pipeline)
&& [info exists socketRdQueue($connId)]
&& [llength $socketRdQueue($connId)]
} {
# The usual case for pipelined responses - if another response is
# queued, arrange to read it.
set token3 [lindex $socketRdQueue($connId) 0]
set socketRdQueue($connId) [lrange $socketRdQueue($connId) 1 end]
variable $token3
upvar 0 $token3 state3
set tk2 [namespace tail $token3]
#Log pipelined, GRANT read access to $token3 in KeepSocket
set socketRdState($connId) $token3
ReceiveResponse $token3
# Other pipelined cases.
# - The test above ensures that, for the pipelined cases in the two
# tests below, the read queue is empty.
# - In those two tests, check whether the next write will be
# nonpipeline.
} elseif {
$state(-pipeline)
&& [info exists socketWrState($connId)]
&& ($socketWrState($connId) eq "peNding")
&& [info exists socketWrQueue($connId)]
&& [llength $socketWrQueue($connId)]
&& (![set token3 [lindex $socketWrQueue($connId) 0]
set ${token3}(-pipeline)
]
)
} {
# This case:
# - Now it the time to run the "pending" request.
# - The next token in the write queue is nonpipeline, and
# socketWrState has been marked "pending" (in
# http::NextPipelinedWrite or http::geturl) so a new pipelined
# request cannot jump the queue.
#
# Tests:
# - In this case the read queue (tested above) is empty and this
# "pending" write token is in front of the rest of the write
# queue.
# - The write state is not Wready and therefore appears to be busy,
# but because it is "pending" we know that it is reserved for the
# first item in the write queue, a non-pipelined request that is
# waiting for the read queue to empty. That has now happened: so
# give that request read and write access.
variable $token3
set conn [set ${token3}(tmpConnArgs)]
#Log nonpipeline, GRANT r/w access to $token3 in KeepSocket
set socketRdState($connId) $token3
set socketWrState($connId) $token3
set socketWrQueue($connId) [lrange $socketWrQueue($connId) 1 end]
# Connect does its own fconfigure.
fileevent $state(sock) writable [list http::Connect $token3 {*}$conn]
#Log ---- $state(sock) << conn to $token3 for HTTP request (c)
} elseif {
$state(-pipeline)
&& [info exists socketWrState($connId)]
&& ($socketWrState($connId) eq "peNding")
} {
# Should not come here. The second block in the previous "elseif"
# test should be tautologous (but was needed in an earlier
# implementation) and will be removed after testing.
# If we get here, the value "pending" was assigned in error.
# This error would block the queue for ever.
Log ^X$tk <<<<< Error in queueing of requests >>>>> - token $token
} elseif {
$state(-pipeline)
&& [info exists socketWrState($connId)]
&& ($socketWrState($connId) eq "Wready")
&& [info exists socketWrQueue($connId)]
&& [llength $socketWrQueue($connId)]
&& (![set token3 [lindex $socketWrQueue($connId) 0]
set ${token3}(-pipeline)
]
)
} {
# This case:
# - The next token in the write queue is nonpipeline, and
# socketWrState is Wready. Get the next event from socketWrQueue.
# Tests:
# - In this case the read state (tested above) is Rready and the
# write state (tested here) is Wready - there is no "pending"
# request.
# Code:
# - The code is the same as the code below for the nonpipelined
# case with a queued request.
variable $token3
set conn [set ${token3}(tmpConnArgs)]
#Log nonpipeline, GRANT r/w access to $token3 in KeepSocket
set socketRdState($connId) $token3
set socketWrState($connId) $token3
set socketWrQueue($connId) [lrange $socketWrQueue($connId) 1 end]
# Connect does its own fconfigure.
fileevent $state(sock) writable [list http::Connect $token3 {*}$conn]
#Log ---- $state(sock) << conn to $token3 for HTTP request (c)
} elseif {
(!$state(-pipeline))
&& [info exists socketWrQueue($connId)]
&& [llength $socketWrQueue($connId)]
&& ($state(connection) ne "close")
} {
# If not pipelined, (socketRdState eq Rready) tells us that we are
# ready for the next write - there is no need to check
# socketWrState. Write the next request, if one is waiting.
# If the next request is pipelined, it receives premature read
# access to the socket. This is not a problem.
set token3 [lindex $socketWrQueue($connId) 0]
variable $token3
set conn [set ${token3}(tmpConnArgs)]
#Log nonpipeline, GRANT r/w access to $token3 in KeepSocket
set socketRdState($connId) $token3
set socketWrState($connId) $token3
set socketWrQueue($connId) [lrange $socketWrQueue($connId) 1 end]
# Connect does its own fconfigure.
fileevent $state(sock) writable [list http::Connect $token3 {*}$conn]
#Log ---- $state(sock) << conn to $token3 for HTTP request (d)
} elseif {(!$state(-pipeline))} {
set socketWrState($connId) Wready
# Rready and Wready and idle: nothing to do.
}
} else {
CloseSocket $state(sock) $token
# There is no socketMapping($state(socketinfo)), so it does not matter
# that CloseQueuedQueries is not called.
}
}
# http::CheckEof -
#
# Read from a socket and close it if eof.
# The command is bound to "fileevent readable" on an idle socket, and
# "eof" is the only event that should trigger the binding, occurring when
# the server times out and half-closes the socket.
#
# A read is necessary so that [eof] gives a meaningful result.
# Any bytes sent are junk (or a bug).
proc http::CheckEof {sock} {
set junk [read $sock]
set n [string length $junk]
if {$n} {
Log "WARNING: $n bytes received but no HTTP request sent"
}
if {[catch {eof $sock} res] || $res} {
# The server has half-closed the socket.
# If a new write has started, its transaction will fail and
# will then be error-handled.
CloseSocket $sock
}
}
# http::CloseSocket -
#
# Close a socket and remove it from the persistent sockets table. If
# possible an http token is included here but when we are called from a
# fileevent on remote closure we need to find the correct entry - hence
# the "else" block of the first "if" command.
proc http::CloseSocket {s {token {}}} {
variable socketMapping
variable socketRdState
variable socketWrState
variable socketRdQueue
variable socketWrQueue
variable socketClosing
variable socketPlayCmd
set tk [namespace tail $token]
catch {fileevent $s readable {}}
set connId {}
if {$token ne ""} {
variable $token
upvar 0 $token state
if {[info exists state(socketinfo)]} {
set connId $state(socketinfo)
}
} else {
set map [array get socketMapping]
set ndx [lsearch -exact $map $s]
if {$ndx >= 0} {
incr ndx -1
set connId [lindex $map $ndx]
}
}
if { ($connId ne {})
&& [info exists socketMapping($connId)]
&& ($socketMapping($connId) eq $s)
} {
Log "Closing connection $connId (sock $socketMapping($connId))"
if {[catch {close $socketMapping($connId)} err]} {
Log "Error closing connection: $err"
}
if {$token eq {}} {
# Cases with a non-empty token are handled by Finish, so the tokens
# are finished in connection order.
http::CloseQueuedQueries $connId
}
} else {
Log "Closing socket $s (no connection info)"
if {[catch {close $s} err]} {
Log "Error closing socket: $err"
}
}
}
# http::CloseQueuedQueries
#
# connId - identifier "domain:port" for the connection
# token - (optional) used only for logging
#
# Called from http::CloseSocket and http::Finish, after a connection is closed,
# to clear the read and write queues if this has not already been done.
proc http::CloseQueuedQueries {connId {token {}}} {
variable socketMapping
variable socketRdState
variable socketWrState
variable socketRdQueue
variable socketWrQueue
variable socketClosing
variable socketPlayCmd
if {![info exists socketMapping($connId)]} {
# Command has already been called.
# Don't come here again - especially recursively.
return
}
# Used only for logging.
if {$token eq {}} {
set tk {}
} else {
set tk [namespace tail $token]
}
if { [info exists socketPlayCmd($connId)]
&& ($socketPlayCmd($connId) ne {ReplayIfClose Wready {} {}})
} {
# Before unsetting, there is some unfinished business.
# - If the server sent "Connection: close", we have stored the command
# for retrying any queued requests in socketPlayCmd, so copy that
# value for execution below. socketClosing(*) was also set.
# - Also clear the queues to prevent calls to Finish that would set the
# state for the requests that will be retried to "finished with error
# status".
set unfinished $socketPlayCmd($connId)
set socketRdQueue($connId) {}
set socketWrQueue($connId) {}
} else {
set unfinished {}
}
Unset $connId
if {$unfinished ne {}} {
Log ^R$tk Any unfinished transactions (excluding $token) failed \
- token $token
{*}$unfinished
}
}
# http::Unset
#
# The trace on "unset socketRdState(*)" will call CancelReadPipeline
# and cancel any queued responses.
# The trace on "unset socketWrState(*)" will call CancelWritePipeline
# and cancel any queued requests.
proc http::Unset {connId} {
variable socketMapping
variable socketRdState
variable socketWrState
variable socketRdQueue
variable socketWrQueue
variable socketClosing
variable socketPlayCmd
unset socketMapping($connId)
unset socketRdState($connId)
unset socketWrState($connId)
unset -nocomplain socketRdQueue($connId)
unset -nocomplain socketWrQueue($connId)
unset -nocomplain socketClosing($connId)
unset -nocomplain socketPlayCmd($connId)
}
# http::reset --
#
# See documentation for details.
#
# Arguments:
# token Connection token.
# why Status info.
#
# Side Effects:
# See Finish
proc http::reset {token {why reset}} {
variable $token
upvar 0 $token state
set state(status) $why
catch {fileevent $state(sock) readable {}}
catch {fileevent $state(sock) writable {}}
Finish $token
if {[info exists state(error)]} {
set errorlist $state(error)
unset state
eval ::error $errorlist
}
}
# http::geturl --
#
# Establishes a connection to a remote url via http.
#
# Arguments:
# url The http URL to goget.
# args Option value pairs. Valid options include:
# -blocksize, -validate, -headers, -timeout
# Results:
# Returns a token for this connection. This token is the name of an
# array that the caller should unset to garbage collect the state.
proc http::geturl {url args} {
variable http
variable urlTypes
variable defaultCharset
variable defaultKeepalive
variable strict
# Initialize the state variable, an array. We'll return the name of this
# array as the token for the transaction.
if {![info exists http(uid)]} {
set http(uid) 0
}
set token [namespace current]::[incr http(uid)]
##Log Starting http::geturl - token $token
variable $token
upvar 0 $token state
set tk [namespace tail $token]
reset $token
Log ^A$tk URL $url - token $token
# Process command options.
array set state {
-binary false
-blocksize 8192
-queryblocksize 8192
-validate 0
-headers {}
-timeout 0
-type application/x-www-form-urlencoded
-queryprogress {}
-protocol 1.1
binary 0
state created
meta {}
method {}
coding {}
currentsize 0
totalsize 0
querylength 0
queryoffset 0
type text/html
body {}
status ""
http ""
connection keep-alive
}
set state(-keepalive) $defaultKeepalive
set state(-strict) $strict
# These flags have their types verified [Bug 811170]
array set type {
-binary boolean
-blocksize integer
-queryblocksize integer
-strict boolean
-timeout integer
-validate boolean
-headers dict
}
set state(charset) $defaultCharset
set options {
-binary -blocksize -channel -command -handler -headers -keepalive
-method -myaddr -progress -protocol -query -queryblocksize
-querychannel -queryprogress -strict -timeout -type -validate
}
set usage [join [lsort $options] ", "]
set options [string map {- ""} $options]
set pat ^-(?:[join $options |])$
foreach {flag value} $args {
if {[regexp -- $pat $flag]} {
# Validate numbers
if {($flag eq "-headers") ? [catch {dict size $value}] :
([info exists type($flag)] && ![string is $type($flag) -strict $value])
} {
unset $token
return -code error \
"Bad value for $flag ($value), must be $type($flag)"
}
set state($flag) $value
} else {
unset $token
return -code error "Unknown option $flag, can be: $usage"
}
}
# Make sure -query and -querychannel aren't both specified
set isQueryChannel [info exists state(-querychannel)]
set isQuery [info exists state(-query)]
if {$isQuery && $isQueryChannel} {
unset $token
return -code error "Can't combine -query and -querychannel options!"
}
# Validate URL, determine the server host and port, and check proxy case
# Recognize user:pass@host URLs also, although we do not do anything with
# that info yet.
# URLs have basically four parts.
# First, before the colon, is the protocol scheme (e.g. http)
# Second, for HTTP-like protocols, is the authority
# The authority is preceded by // and lasts up to (but not including)
# the following / or ? and it identifies up to four parts, of which
# only one, the host, is required (if an authority is present at all).
# All other parts of the authority (user name, password, port number)
# are optional.
# Third is the resource name, which is split into two parts at a ?
# The first part (from the single "/" up to "?") is the path, and the
# second part (from that "?" up to "#") is the query. *HOWEVER*, we do
# not need to separate them; we send the whole lot to the server.
# Both, path and query are allowed to be missing, including their
# delimiting character.
# Fourth is the fragment identifier, which is everything after the first
# "#" in the URL. The fragment identifier MUST NOT be sent to the server
# and indeed, we don't bother to validate it (it could be an error to
# pass it in here, but it's cheap to strip).
#
# An example of a URL that has all the parts:
#
# http://jschmoe:[email protected]:8000/foo/bar.tml?q=foo#changes
#
# The "http" is the protocol, the user is "jschmoe", the password is
# "xyzzy", the host is "www.bogus.net", the port is "8000", the path is
# "/foo/bar.tml", the query is "q=foo", and the fragment is "changes".
#
# Note that the RE actually combines the user and password parts, as
# recommended in RFC 3986. Indeed, that RFC states that putting passwords
# in URLs is a Really Bad Idea, something with which I would agree utterly.
#
# From a validation perspective, we need to ensure that the parts of the
# URL that are going to the server are correctly encoded. This is only
# done if $state(-strict) is true (inherited from $::http::strict).
set URLmatcher {(?x) # this is _expanded_ syntax
^
(?: (\w+) : ) ? # <protocol scheme>
(?: //
(?:
(
[^@/\#?]+ # <userinfo part of authority>
) @
)?
( # <host part of authority>
[^/:\#?]+ | # host name or IPv4 address
\[ [^/\#?]+ \] # IPv6 address in square brackets
)
(?: : (\d+) )? # <port part of authority>
)?
( [/\?] [^\#]*)? # <path> (including query)
(?: \# (.*) )? # <fragment>
$
}
# Phase one: parse
if {![regexp -- $URLmatcher $url -> proto user host port srvurl]} {
unset $token
return -code error "Unsupported URL: $url"
}
# Phase two: validate
set host [string trim $host {[]}]; # strip square brackets from IPv6 address
if {$host eq ""} {
# Caller has to provide a host name; we do not have a "default host"
# that would enable us to handle relative URLs.
unset $token
return -code error "Missing host part: $url"
# Note that we don't check the hostname for validity here; if it's
# invalid, we'll simply fail to resolve it later on.
}
if {$port ne "" && $port > 65535} {
unset $token
return -code error "Invalid port number: $port"
}
# The user identification and resource identification parts of the URL can
# have encoded characters in them; take care!
if {$user ne ""} {
# Check for validity according to RFC 3986, Appendix A
set validityRE {(?xi)
^
(?: [-\w.~!$&'()*+,;=:] | %[0-9a-f][0-9a-f] )+
$
}
if {$state(-strict) && ![regexp -- $validityRE $user]} {
unset $token
# Provide a better error message in this error case
if {[regexp {(?i)%(?![0-9a-f][0-9a-f]).?.?} $user bad]} {
return -code error \
"Illegal encoding character usage \"$bad\" in URL user"
}
return -code error "Illegal characters in URL user"
}
}
if {$srvurl ne ""} {
# RFC 3986 allows empty paths (not even a /), but servers
# return 400 if the path in the HTTP request doesn't start
# with / , so add it here if needed.
if {[string index $srvurl 0] ne "/"} {
set srvurl /$srvurl
}
# Check for validity according to RFC 3986, Appendix A
set validityRE {(?xi)
^
# Path part (already must start with / character)
(?: [-\w.~!$&'()*+,;=:@/] | %[0-9a-f][0-9a-f] )*
# Query part (optional, permits ? characters)
(?: \? (?: [-\w.~!$&'()*+,;=:@/?] | %[0-9a-f][0-9a-f] )* )?
$
}
if {$state(-strict) && ![regexp -- $validityRE $srvurl]} {
unset $token
# Provide a better error message in this error case
if {[regexp {(?i)%(?![0-9a-f][0-9a-f])..} $srvurl bad]} {
return -code error \
"Illegal encoding character usage \"$bad\" in URL path"
}
return -code error "Illegal characters in URL path"
}
} else {
set srvurl /
}
if {$proto eq ""} {
set proto http
}
set lower [string tolower $proto]
if {![info exists urlTypes($lower)]} {
unset $token
return -code error "Unsupported URL type \"$proto\""
}
set defport [lindex $urlTypes($lower) 0]
set defcmd [lindex $urlTypes($lower) 1]
if {$port eq ""} {
set port $defport
}
if {![catch {$http(-proxyfilter) $host} proxy]} {
set phost [lindex $proxy 0]
set pport [lindex $proxy 1]
}
# OK, now reassemble into a full URL
set url ${proto}://
if {$user ne ""} {
append url $user
append url @
}
append url $host
if {$port != $defport} {
append url : $port
}
append url $srvurl
# Don't append the fragment!
set state(url) $url
set sockopts [list -async]
# If we are using the proxy, we must pass in the full URL that includes
# the server name.
if {[info exists phost] && ($phost ne "")} {
set srvurl $url
set targetAddr [list $phost $pport]
} else {
set targetAddr [list $host $port]
}
# Proxy connections aren't shared among different hosts.
set state(socketinfo) $host:$port
# Save the accept types at this point to prevent a race condition. [Bug
# c11a51c482]
set state(accept-types) $http(-accept)
if {$isQuery || $isQueryChannel} {
# It's a POST.
# A client wishing to send a non-idempotent request SHOULD wait to send
# that request until it has received the response status for the
# previous request.
if {$http(-postfresh)} {
# Override -keepalive for a POST. Use a new connection, and thus
# avoid the small risk of a race against server timeout.
set state(-keepalive) 0
} else {
# Allow -keepalive but do not -pipeline - wait for the previous
# transaction to finish.
# There is a small risk of a race against server timeout.
set state(-pipeline) 0
}
} else {
# It's a GET or HEAD.
set state(-pipeline) $http(-pipeline)
}
# We cannot handle chunked encodings with -handler, so force HTTP/1.0
# until we can manage this.
if {[info exists state(-handler)]} {
set state(-protocol) 1.0
}
# RFC 7320 A.1 - HTTP/1.0 Keep-Alive is problematic. We do not support it.
if {$state(-protocol) eq "1.0"} {
set state(connection) close
set state(-keepalive) 0
}
# See if we are supposed to use a previously opened channel.
# - In principle, ANY call to http::geturl could use a previously opened
# channel if it is available - the "Connection: keep-alive" header is a
# request to leave the channel open AFTER completion of this call.
# - In fact, we try to use an existing channel only if -keepalive 1 -- this
# means that at most one channel is left open for each value of
# $state(socketinfo). This property simplifies the mapping of open
# channels.
set reusing 0
set alreadyQueued 0
if {$state(-keepalive)} {
variable socketMapping
variable socketRdState
variable socketWrState
variable socketRdQueue
variable socketWrQueue
variable socketClosing
variable socketPlayCmd
if {[info exists socketMapping($state(socketinfo))]} {
# - If the connection is idle, it has a "fileevent readable" binding
# to http::CheckEof, in case the server times out and half-closes
# the socket (http::CheckEof closes the other half).
# - We leave this binding in place until just before the last
# puts+flush in http::Connected (GET/HEAD) or http::Write (POST),
# after which the HTTP response might be generated.
if { [info exists socketClosing($state(socketinfo))]
&& $socketClosing($state(socketinfo))
} {
# socketClosing(*) is set because the server has sent a
# "Connection: close" header.
# Do not use the persistent socket again.
# Since we have only one persistent socket per server, and the
# old socket is not yet dead, add the request to the write queue
# of the dying socket, which will be replayed by ReplayIfClose.
# Also add it to socketWrQueue(*) which is used only if an error
# causes a call to Finish.
set reusing 1
set sock $socketMapping($state(socketinfo))
Log "reusing socket $sock for $state(socketinfo) - token $token"
set alreadyQueued 1
lassign $socketPlayCmd($state(socketinfo)) com0 com1 com2 com3
lappend com3 $token
set socketPlayCmd($state(socketinfo)) [list $com0 $com1 $com2 $com3]
lappend socketWrQueue($state(socketinfo)) $token
} elseif {[catch {fconfigure $socketMapping($state(socketinfo))}]} {
# FIXME Is it still possible for this code to be executed? If
# so, this could be another place to call TestForReplay,
# rather than discarding the queued transactions.
Log "WARNING: socket for $state(socketinfo) was closed\
- token $token"
Log "WARNING - if testing, pay special attention to this\
case (GH) which is seldom executed - token $token"
# This will call CancelReadPipeline, CancelWritePipeline, and
# cancel any queued requests, responses.
Unset $state(socketinfo)
} else {
# Use the persistent socket.
# The socket may not be ready to write: an earlier request might
# still be still writing (in the pipelined case) or
# writing/reading (in the nonpipeline case). This possibility
# is handled by socketWrQueue later in this command.
set reusing 1
set sock $socketMapping($state(socketinfo))
Log "reusing socket $sock for $state(socketinfo) - token $token"
}
# Do not automatically close the connection socket.
set state(connection) keep-alive
}
}
if {$reusing} {
# Define state(tmpState) and state(tmpOpenCmd) for use
# by http::ReplayIfDead if the persistent connection has died.
set state(tmpState) [array get state]
# Pass -myaddr directly to the socket command
if {[info exists state(-myaddr)]} {
lappend sockopts -myaddr $state(-myaddr)
}
set state(tmpOpenCmd) [list {*}$defcmd {*}$sockopts {*}$targetAddr]
}
set state(reusing) $reusing
# Excluding ReplayIfDead and the decision whether to call it, there are four
# places outside http::geturl where state(reusing) is used:
# - Connected - if reusing and not pipelined, start the state(-timeout)
# timeout (when writing).
# - DoneRequest - if reusing and pipelined, send the next pipelined write
# - Event - if reusing and pipelined, start the state(-timeout)
# timeout (when reading).
# - Event - if (not reusing) and pipelined, send the next pipelined
# write
# See comments above re the start of this timeout in other cases.
if {(!$state(reusing)) && ($state(-timeout) > 0)} {
set state(after) [after $state(-timeout) \
[list http::reset $token timeout]]
}
if {![info exists sock]} {
# Pass -myaddr directly to the socket command
if {[info exists state(-myaddr)]} {
lappend sockopts -myaddr $state(-myaddr)
}
set pre [clock milliseconds]
##Log pre socket opened, - token $token
##Log [concat $defcmd $sockopts $targetAddr] - token $token
if {[catch {eval $defcmd $sockopts $targetAddr} sock errdict]} {
# Something went wrong while trying to establish the connection.
# Clean up after events and such, but DON'T call the command
# callback (if available) because we're going to throw an
# exception from here instead.
set state(sock) NONE
Finish $token $sock 1
cleanup $token
dict unset errdict -level
return -options $errdict $sock
} else {
# Initialisation of a new socket.
##Log post socket opened, - token $token
##Log socket opened, now fconfigure - token $token
set delay [expr {[clock milliseconds] - $pre}]
if {$delay > 3000} {
Log socket delay $delay - token $token
}
fconfigure $sock -translation {auto crlf} \
-buffersize $state(-blocksize)
##Log socket opened, DONE fconfigure - token $token
}
}
# Command [socket] is called with -async, but takes 5s to 5.1s to return,
# with probability of order 1 in 10,000. This may be a bizarre scheduling
# issue with my (KJN's) system (Fedora Linux).
# This does not cause a problem (unless the request times out when this
# command returns).
set state(sock) $sock
Log "Using $sock for $state(socketinfo) - token $token" \
[expr {$state(-keepalive)?"keepalive":""}]
if { $state(-keepalive)
&& (![info exists socketMapping($state(socketinfo))])
} {
# Freshly-opened socket that we would like to become persistent.
set socketMapping($state(socketinfo)) $sock
if {![info exists socketRdState($state(socketinfo))]} {
set socketRdState($state(socketinfo)) {}
set varName ::http::socketRdState($state(socketinfo))
trace add variable $varName unset ::http::CancelReadPipeline
}
if {![info exists socketWrState($state(socketinfo))]} {
set socketWrState($state(socketinfo)) {}
set varName ::http::socketWrState($state(socketinfo))
trace add variable $varName unset ::http::CancelWritePipeline
}
if {$state(-pipeline)} {
#Log new, init for pipelined, GRANT write access to $token in geturl
# Also grant premature read access to the socket. This is OK.
set socketRdState($state(socketinfo)) $token
set socketWrState($state(socketinfo)) $token
} else {
# socketWrState is not used by this non-pipelined transaction.
# We cannot leave it as "Wready" because the next call to
# http::geturl with a pipelined transaction would conclude that the
# socket is available for writing.
#Log new, init for nonpipeline, GRANT r/w access to $token in geturl
set socketRdState($state(socketinfo)) $token
set socketWrState($state(socketinfo)) $token
}
set socketRdQueue($state(socketinfo)) {}
set socketWrQueue($state(socketinfo)) {}
set socketClosing($state(socketinfo)) 0
set socketPlayCmd($state(socketinfo)) {ReplayIfClose Wready {} {}}
}
if {![info exists phost]} {
set phost ""
}
if {$reusing} {
# For use by http::ReplayIfDead if the persistent connection has died.
# Also used by NextPipelinedWrite.
set state(tmpConnArgs) [list $proto $phost $srvurl]
}
# The element socketWrState($connId) has a value which is either the name of
# the token that is permitted to write to the socket, or "Wready" if no
# token is permitted to write.
#
# The code that sets the value to Wready immediately calls
# http::NextPipelinedWrite, which examines socketWrQueue($connId) and
# processes the next request in the queue, if there is one. The value
# Wready is not found when the interpreter is in the event loop unless the
# socket is idle.
#
# The element socketRdState($connId) has a value which is either the name of
# the token that is permitted to read from the socket, or "Rready" if no
# token is permitted to read.
#
# The code that sets the value to Rready then examines
# socketRdQueue($connId) and processes the next request in the queue, if
# there is one. The value Rready is not found when the interpreter is in
# the event loop unless the socket is idle.
if {$alreadyQueued} {
# A write may or may not be in progress. There is no need to set
# socketWrState to prevent another call stealing write access - all
# subsequent calls on this socket will come here because the socket
# will close after the current read, and its
# socketClosing($connId) is 1.
##Log "HTTP request for token $token is queued"
} elseif { $reusing
&& $state(-pipeline)
&& ($socketWrState($state(socketinfo)) ne "Wready")
} {
##Log "HTTP request for token $token is queued for pipelined use"
lappend socketWrQueue($state(socketinfo)) $token
} elseif { $reusing
&& (!$state(-pipeline))
&& ($socketWrState($state(socketinfo)) ne "Wready")
} {
# A write is queued or in progress. Lappend to the write queue.
##Log "HTTP request for token $token is queued for nonpipeline use"
lappend socketWrQueue($state(socketinfo)) $token
} elseif { $reusing
&& (!$state(-pipeline))
&& ($socketWrState($state(socketinfo)) eq "Wready")
&& ($socketRdState($state(socketinfo)) ne "Rready")
} {
# A read is queued or in progress, but not a write. Cannot start the
# nonpipeline transaction, but must set socketWrState to prevent a
# pipelined request jumping the queue.
##Log "HTTP request for token $token is queued for nonpipeline use"
#Log re-use nonpipeline, GRANT delayed write access to $token in geturl
set socketWrState($state(socketinfo)) peNding
lappend socketWrQueue($state(socketinfo)) $token
} else {
if {$reusing && $state(-pipeline)} {
#Log re-use pipelined, GRANT write access to $token in geturl
set socketWrState($state(socketinfo)) $token
} elseif {$reusing} {
# Cf tests above - both are ready.
#Log re-use nonpipeline, GRANT r/w access to $token in geturl
set socketRdState($state(socketinfo)) $token
set socketWrState($state(socketinfo)) $token
}
# All (!$reusing) cases come here, and also some $reusing cases if the
# connection is ready.
#Log ---- $state(socketinfo) << conn to $token for HTTP request (a)
# Connect does its own fconfigure.
fileevent $sock writable \
[list http::Connect $token $proto $phost $srvurl]
}
# Wait for the connection to complete.
if {![info exists state(-command)]} {
# geturl does EVERYTHING asynchronously, so if the user
# calls it synchronously, we just do a wait here.
http::wait $token
if {![info exists state]} {
# If we timed out then Finish has been called and the users
# command callback may have cleaned up the token. If so we end up
# here with nothing left to do.
return $token
} elseif {$state(status) eq "error"} {
# Something went wrong while trying to establish the connection.
# Clean up after events and such, but DON'T call the command
# callback (if available) because we're going to throw an
# exception from here instead.
set err [lindex $state(error) 0]
cleanup $token
return -code error $err
}
}
##Log Leaving http::geturl - token $token
return $token
}
# http::Connected --
#
# Callback used when the connection to the HTTP server is actually
# established.
#
# Arguments:
# token State token.
# proto What protocol (http, https, etc.) was used to connect.
# phost Are we using keep-alive? Non-empty if yes.
# srvurl Service-local URL that we're requesting
# Results:
# None.
proc http::Connected {token proto phost srvurl} {
variable http
variable urlTypes
variable socketMapping
variable socketRdState
variable socketWrState
variable socketRdQueue
variable socketWrQueue
variable socketClosing
variable socketPlayCmd
variable $token
upvar 0 $token state
set tk [namespace tail $token]
if {$state(reusing) && (!$state(-pipeline)) && ($state(-timeout) > 0)} {
set state(after) [after $state(-timeout) \
[list http::reset $token timeout]]
}
# Set back the variables needed here.
set sock $state(sock)
set isQueryChannel [info exists state(-querychannel)]
set isQuery [info exists state(-query)]
set host [lindex [split $state(socketinfo) :] 0]
set port [lindex [split $state(socketinfo) :] 1]
set lower [string tolower $proto]
set defport [lindex $urlTypes($lower) 0]
# Send data in cr-lf format, but accept any line terminators.
# Initialisation to {auto *} now done in geturl, KeepSocket and DoneRequest.
# We are concerned here with the request (write) not the response (read).
lassign [fconfigure $sock -translation] trRead trWrite
fconfigure $sock -translation [list $trRead crlf] \
-buffersize $state(-blocksize)
# The following is disallowed in safe interpreters, but the socket is
# already in non-blocking mode in that case.
catch {fconfigure $sock -blocking off}
set how GET
if {$isQuery} {
set state(querylength) [string length $state(-query)]
if {$state(querylength) > 0} {
set how POST
set contDone 0
} else {
# There's no query data.
unset state(-query)
set isQuery 0
}
} elseif {$state(-validate)} {
set how HEAD
} elseif {$isQueryChannel} {
set how POST
# The query channel must be blocking for the async Write to
# work properly.
fconfigure $state(-querychannel) -blocking 1 -translation binary
set contDone 0
}
if {[info exists state(-method)] && ($state(-method) ne "")} {
set how $state(-method)
}
set accept_types_seen 0
Log ^B$tk begin sending request - token $token
if {[catch {
set state(method) $how
puts $sock "$how $srvurl HTTP/$state(-protocol)"
if {[dict exists $state(-headers) Host]} {
# Allow Host spoofing. [Bug 928154]
puts $sock "Host: [dict get $state(-headers) Host]"
} elseif {$port == $defport} {
# Don't add port in this case, to handle broken servers. [Bug
# #504508]
puts $sock "Host: $host"
} else {
puts $sock "Host: $host:$port"
}
puts $sock "User-Agent: $http(-useragent)"
if {($state(-protocol) > 1.0) && $state(-keepalive)} {
# Send this header, because a 1.1 server is not compelled to treat
# this as the default.
puts $sock "Connection: keep-alive"
}
if {($state(-protocol) > 1.0) && !$state(-keepalive)} {
puts $sock "Connection: close" ;# RFC2616 sec 8.1.2.1
}
if {($state(-protocol) < 1.1)} {
# RFC7230 A.1
# Some server implementations of HTTP/1.0 have a faulty
# implementation of RFC 2068 Keep-Alive.
# Don't leave this to chance.
# For HTTP/1.0 we have already "set state(connection) close"
# and "state(-keepalive) 0".
puts $sock "Connection: close"
}
# RFC7230 A.1 - "clients are encouraged not to send the
# Proxy-Connection header field in any requests"
set accept_encoding_seen 0
set content_type_seen 0
dict for {key value} $state(-headers) {
set value [string map [list \n "" \r ""] $value]
set key [string map {" " -} [string trim $key]]
if {[string equal -nocase $key "host"]} {
continue
}
if {[string equal -nocase $key "accept-encoding"]} {
set accept_encoding_seen 1
}
if {[string equal -nocase $key "accept"]} {
set accept_types_seen 1
}
if {[string equal -nocase $key "content-type"]} {
set content_type_seen 1
}
if {[string equal -nocase $key "content-length"]} {
set contDone 1
set state(querylength) $value
}
if {[string length $key]} {
puts $sock "$key: $value"
}
}
# Allow overriding the Accept header on a per-connection basis. Useful
# for working with REST services. [Bug c11a51c482]
if {!$accept_types_seen} {
puts $sock "Accept: $state(accept-types)"
}
if { (!$accept_encoding_seen)
&& (![info exists state(-handler)])
&& $http(-zip)
} {
puts $sock "Accept-Encoding: gzip,deflate,compress"
}
if {$isQueryChannel && ($state(querylength) == 0)} {
# Try to determine size of data in channel. If we cannot seek, the
# surrounding catch will trap us
set start [tell $state(-querychannel)]
seek $state(-querychannel) 0 end
set state(querylength) \
[expr {[tell $state(-querychannel)] - $start}]
seek $state(-querychannel) $start
}
# Flush the request header and set up the fileevent that will either
# push the POST data or read the response.
#
# fileevent note:
#
# It is possible to have both the read and write fileevents active at
# this point. The only scenario it seems to affect is a server that
# closes the connection without reading the POST data. (e.g., early
# versions TclHttpd in various error cases). Depending on the
# platform, the client may or may not be able to get the response from
# the server because of the error it will get trying to write the post
# data. Having both fileevents active changes the timing and the
# behavior, but no two platforms (among Solaris, Linux, and NT) behave
# the same, and none behave all that well in any case. Servers should
# always read their POST data if they expect the client to read their
# response.
if {$isQuery || $isQueryChannel} {
# POST method.
if {!$content_type_seen} {
puts $sock "Content-Type: $state(-type)"
}
if {!$contDone} {
puts $sock "Content-Length: $state(querylength)"
}
puts $sock ""
flush $sock
# Flush flushes the error in the https case with a bad handshake:
# else the socket never becomes writable again, and hangs until
# timeout (if any).
lassign [fconfigure $sock -translation] trRead trWrite
fconfigure $sock -translation [list $trRead binary]
fileevent $sock writable [list http::Write $token]
# The http::Write command decides when to make the socket readable,
# using the same test as the GET/HEAD case below.
} else {
# GET or HEAD method.
if { (![catch {fileevent $sock readable} binding])
&& ($binding eq [list http::CheckEof $sock])
} {
# Remove the "fileevent readable" binding of an idle persistent
# socket to http::CheckEof. We can no longer treat bytes
# received as junk. The server might still time out and
# half-close the socket if it has not yet received the first
# "puts".
fileevent $sock readable {}
}
puts $sock ""
flush $sock
Log ^C$tk end sending request - token $token
# End of writing (GET/HEAD methods). The request has been sent.
DoneRequest $token
}
} err]} {
# The socket probably was never connected, OR the connection dropped
# later, OR https handshake error, which may be discovered as late as
# the "flush" command above...
Log "WARNING - if testing, pay special attention to this\
case (GI) which is seldom executed - token $token"
if {[info exists state(reusing)] && $state(reusing)} {
# The socket was closed at the server end, and closed at
# this end by http::CheckEof.
if {[TestForReplay $token write $err a]} {
return
} else {
Finish $token {failed to re-use socket}
}
# else:
# This is NOT a persistent socket that has been closed since its
# last use.
# If any other requests are in flight or pipelined/queued, they will
# be discarded.
} elseif {$state(status) eq ""} {
# ...https handshake errors come here.
set msg [registerError $sock]
registerError $sock {}
if {$msg eq {}} {
set msg {failed to use socket}
}
Finish $token $msg
} elseif {$state(status) ne "error"} {
Finish $token $err
}
}
}
# http::registerError
#
# Called (for example when processing TclTLS activity) to register
# an error for a connection on a specific socket. This helps
# http::Connected to deliver meaningful error messages, e.g. when a TLS
# certificate fails verification.
#
# Usage: http::registerError socket ?newValue?
#
# "set" semantics, except that a "get" (a call without a new value) for a
# non-existent socket returns {}, not an error.
proc http::registerError {sock args} {
variable registeredErrors
if { ([llength $args] == 0)
&& (![info exists registeredErrors($sock)])
} {
return
} elseif { ([llength $args] == 1)
&& ([lindex $args 0] eq {})
} {
unset -nocomplain registeredErrors($sock)
return
}
set registeredErrors($sock) {*}$args
}
# http::DoneRequest --
#
# Command called when a request has been sent. It will arrange the
# next request and/or response as appropriate.
#
# If this command is called when $socketClosing(*), the request $token
# that calls it must be pipelined and destined to fail.
proc http::DoneRequest {token} {
variable http
variable socketMapping
variable socketRdState
variable socketWrState
variable socketRdQueue
variable socketWrQueue
variable socketClosing
variable socketPlayCmd
variable $token
upvar 0 $token state
set tk [namespace tail $token]
set sock $state(sock)
# If pipelined, connect the next HTTP request to the socket.
if {$state(reusing) && $state(-pipeline)} {
# Enable next token (if any) to write.
# The value "Wready" is set only here, and
# in http::Event after reading the response-headers of a
# non-reusing transaction.
# Previous value is $token. It cannot be pending.
set socketWrState($state(socketinfo)) Wready
# Now ready to write the next pipelined request (if any).
http::NextPipelinedWrite $token
} else {
# If pipelined, this is the first transaction on this socket. We wait
# for the response headers to discover whether the connection is
# persistent. (If this is not done and the connection is not
# persistent, we SHOULD retry and then MUST NOT pipeline before knowing
# that we have a persistent connection
# (rfc2616 8.1.2.2)).
}
# Connect to receive the response, unless the socket is pipelined
# and another response is being sent.
# This code block is separate from the code below because there are
# cases where socketRdState already has the value $token.
if { $state(-keepalive)
&& $state(-pipeline)
&& [info exists socketRdState($state(socketinfo))]
&& ($socketRdState($state(socketinfo)) eq "Rready")
} {
#Log pipelined, GRANT read access to $token in Connected
set socketRdState($state(socketinfo)) $token
}
if { $state(-keepalive)
&& $state(-pipeline)
&& [info exists socketRdState($state(socketinfo))]
&& ($socketRdState($state(socketinfo)) ne $token)
} {
# Do not read from the socket until it is ready.
##Log "HTTP response for token $token is queued for pipelined use"
# If $socketClosing(*), then the caller will be a pipelined write and
# execution will come here.
# This token has already been recorded as "in flight" for writing.
# When the socket is closed, the read queue will be cleared in
# CloseQueuedQueries and so the "lappend" here has no effect.
lappend socketRdQueue($state(socketinfo)) $token
} else {
# In the pipelined case, connection for reading depends on the
# value of socketRdState.
# In the nonpipeline case, connection for reading always occurs.
ReceiveResponse $token
}
}
# http::ReceiveResponse
#
# Connects token to its socket for reading.
proc http::ReceiveResponse {token} {
variable $token
upvar 0 $token state
set tk [namespace tail $token]
set sock $state(sock)
#Log ---- $state(socketinfo) >> conn to $token for HTTP response
lassign [fconfigure $sock -translation] trRead trWrite
fconfigure $sock -translation [list auto $trWrite] \
-buffersize $state(-blocksize)
Log ^D$tk begin receiving response - token $token
coroutine ${token}EventCoroutine http::Event $sock $token
if {[info exists state(-handler)] || [info exists state(-progress)]} {
fileevent $sock readable [list http::EventGateway $sock $token]
} else {
fileevent $sock readable ${token}EventCoroutine
}
return
}
# http::EventGateway
#
# Bug [c2dc1da315].
# - Recursive launch of the coroutine can occur if a -handler or -progress
# callback is used, and the callback command enters the event loop.
# - To prevent this, the fileevent "binding" is disabled while the
# coroutine is in flight.
# - If a recursive call occurs despite these precautions, it is not
# trapped and discarded here, because it is better to report it as a
# bug.
# - Although this solution is believed to be sufficiently general, it is
# used only if -handler or -progress is specified. In other cases,
# the coroutine is called directly.
proc http::EventGateway {sock token} {
variable $token
upvar 0 $token state
fileevent $sock readable {}
catch {${token}EventCoroutine} res opts
if {[info commands ${token}EventCoroutine] ne {}} {
# The coroutine can be deleted by completion (a non-yield return), by
# http::Finish (when there is a premature end to the transaction), by
# http::reset or http::cleanup, or if the caller set option -channel
# but not option -handler: in the last case reading from the socket is
# now managed by commands ::http::Copy*, http::ReceiveChunked, and
# http::make-transformation-chunked.
#
# Catch in case the coroutine has closed the socket.
catch {fileevent $sock readable [list http::EventGateway $sock $token]}
}
# If there was an error, re-throw it.
return -options $opts $res
}
# http::NextPipelinedWrite
#
# - Connecting a socket to a token for writing is done by this command and by
# command KeepSocket.
# - If another request has a pipelined write scheduled for $token's socket,
# and if the socket is ready to accept it, connect the write and update
# the queue accordingly.
# - This command is called from http::DoneRequest and http::Event,
# IF $state(-pipeline) AND (the current transfer has reached the point at
# which the socket is ready for the next request to be written).
# - This command is called when a token has write access and is pipelined and
# keep-alive, and sets socketWrState to Wready.
# - The command need not consider the case where socketWrState is set to a token
# that does not yet have write access. Such a token is waiting for Rready,
# and the assignment of the connection to the token will be done elsewhere (in
# http::KeepSocket).
# - This command cannot be called after socketWrState has been set to a
# "pending" token value (that is then overwritten by the caller), because that
# value is set by this command when it is called by an earlier token when it
# relinquishes its write access, and the pending token is always the next in
# line to write.
proc http::NextPipelinedWrite {token} {
variable http
variable socketRdState
variable socketWrState
variable socketWrQueue
variable socketClosing
variable $token
upvar 0 $token state
set connId $state(socketinfo)
if { [info exists socketClosing($connId)]
&& $socketClosing($connId)
} {
# socketClosing(*) is set because the server has sent a
# "Connection: close" header.
# Behave as if the queues are empty - so do nothing.
} elseif { $state(-pipeline)
&& [info exists socketWrState($connId)]
&& ($socketWrState($connId) eq "Wready")
&& [info exists socketWrQueue($connId)]
&& [llength $socketWrQueue($connId)]
&& ([set token2 [lindex $socketWrQueue($connId) 0]
set ${token2}(-pipeline)
]
)
} {
# - The usual case for a pipelined connection, ready for a new request.
#Log pipelined, GRANT write access to $token2 in NextPipelinedWrite
set conn [set ${token2}(tmpConnArgs)]
set socketWrState($connId) $token2
set socketWrQueue($connId) [lrange $socketWrQueue($connId) 1 end]
# Connect does its own fconfigure.
fileevent $state(sock) writable [list http::Connect $token2 {*}$conn]
#Log ---- $connId << conn to $token2 for HTTP request (b)
# In the tests below, the next request will be nonpipeline.
} elseif { $state(-pipeline)
&& [info exists socketWrState($connId)]
&& ($socketWrState($connId) eq "Wready")
&& [info exists socketWrQueue($connId)]
&& [llength $socketWrQueue($connId)]
&& (![ set token3 [lindex $socketWrQueue($connId) 0]
set ${token3}(-pipeline)
]
)
&& [info exists socketRdState($connId)]
&& ($socketRdState($connId) eq "Rready")
} {
# The case in which the next request will be non-pipelined, and the read
# and write queues is ready: which is the condition for a non-pipelined
# write.
variable $token3
upvar 0 $token3 state3
set conn [set ${token3}(tmpConnArgs)]
#Log nonpipeline, GRANT r/w access to $token3 in NextPipelinedWrite
set socketRdState($connId) $token3
set socketWrState($connId) $token3
set socketWrQueue($connId) [lrange $socketWrQueue($connId) 1 end]
# Connect does its own fconfigure.
fileevent $state(sock) writable [list http::Connect $token3 {*}$conn]
#Log ---- $state(sock) << conn to $token3 for HTTP request (c)
} elseif { $state(-pipeline)
&& [info exists socketWrState($connId)]
&& ($socketWrState($connId) eq "Wready")
&& [info exists socketWrQueue($connId)]
&& [llength $socketWrQueue($connId)]
&& (![set token2 [lindex $socketWrQueue($connId) 0]
set ${token2}(-pipeline)
]
)
} {
# - The case in which the next request will be non-pipelined, but the
# read queue is NOT ready.
# - A read is queued or in progress, but not a write. Cannot start the
# nonpipeline transaction, but must set socketWrState to prevent a new
# pipelined request (in http::geturl) jumping the queue.
# - Because socketWrState($connId) is not set to Wready, the assignment
# of the connection to $token2 will be done elsewhere - by command
# http::KeepSocket when $socketRdState($connId) is set to "Rready".
#Log re-use nonpipeline, GRANT delayed write access to $token in NextP..
set socketWrState($connId) peNding
}
}
# http::CancelReadPipeline
#
# Cancel pipelined responses on a closing "Keep-Alive" socket.
#
# - Called by a variable trace on "unset socketRdState($connId)".
# - The variable relates to a Keep-Alive socket, which has been closed.
# - Cancels all pipelined responses. The requests have been sent,
# the responses have not yet been received.
# - This is a hard cancel that ends each transaction with error status,
# and closes the connection. Do not use it if you want to replay failed
# transactions.
# - N.B. Always delete ::http::socketRdState($connId) before deleting
# ::http::socketRdQueue($connId), or this command will do nothing.
#
# Arguments
# As for a trace command on a variable.
proc http::CancelReadPipeline {name1 connId op} {
variable socketRdQueue
##Log CancelReadPipeline $name1 $connId $op
if {[info exists socketRdQueue($connId)]} {
set msg {the connection was closed by CancelReadPipeline}
foreach token $socketRdQueue($connId) {
set tk [namespace tail $token]
Log ^X$tk end of response "($msg)" - token $token
set ${token}(status) eof
Finish $token ;#$msg
}
set socketRdQueue($connId) {}
}
}
# http::CancelWritePipeline
#
# Cancel queued events on a closing "Keep-Alive" socket.
#
# - Called by a variable trace on "unset socketWrState($connId)".
# - The variable relates to a Keep-Alive socket, which has been closed.
# - In pipelined or nonpipeline case: cancels all queued requests. The
# requests have not yet been sent, the responses are not due.
# - This is a hard cancel that ends each transaction with error status,
# and closes the connection. Do not use it if you want to replay failed
# transactions.
# - N.B. Always delete ::http::socketWrState($connId) before deleting
# ::http::socketWrQueue($connId), or this command will do nothing.
#
# Arguments
# As for a trace command on a variable.
proc http::CancelWritePipeline {name1 connId op} {
variable socketWrQueue
##Log CancelWritePipeline $name1 $connId $op
if {[info exists socketWrQueue($connId)]} {
set msg {the connection was closed by CancelWritePipeline}
foreach token $socketWrQueue($connId) {
set tk [namespace tail $token]
Log ^X$tk end of response "($msg)" - token $token
set ${token}(status) eof
Finish $token ;#$msg
}
set socketWrQueue($connId) {}
}
}
# http::ReplayIfDead --
#
# - A query on a re-used persistent socket failed at the earliest opportunity,
# because the socket had been closed by the server. Keep the token, tidy up,
# and try to connect on a fresh socket.
# - The connection is monitored for eof by the command http::CheckEof. Thus
# http::ReplayIfDead is needed only when a server event (half-closing an
# apparently idle connection), and a client event (sending a request) occur at
# almost the same time, and neither client nor server detects the other's
# action before performing its own (an "asynchronous close event").
# - To simplify testing of http::ReplayIfDead, set TEST_EOF 1 in
# http::KeepSocket, and then http::ReplayIfDead will be called if http::geturl
# is called at any time after the server timeout.
#
# Arguments:
# token Connection token.
#
# Side Effects:
# Use the same token, but try to open a new socket.
proc http::ReplayIfDead {tokenArg doing} {
variable socketMapping
variable socketRdState
variable socketWrState
variable socketRdQueue
variable socketWrQueue
variable socketClosing
variable socketPlayCmd
variable $tokenArg
upvar 0 $tokenArg stateArg
Log running http::ReplayIfDead for $tokenArg $doing
# 1. Merge the tokens for transactions in flight, the read (response) queue,
# and the write (request) queue.
set InFlightR {}
set InFlightW {}
# Obtain the tokens for transactions in flight.
if {$stateArg(-pipeline)} {
# Two transactions may be in flight. The "read" transaction was first.
# It is unlikely that the server would close the socket if a response
# was pending; however, an earlier request (as well as the present
# request) may have been sent and ignored if the socket was half-closed
# by the server.
if { [info exists socketRdState($stateArg(socketinfo))]
&& ($socketRdState($stateArg(socketinfo)) ne "Rready")
} {
lappend InFlightR $socketRdState($stateArg(socketinfo))
} elseif {($doing eq "read")} {
lappend InFlightR $tokenArg
}
if { [info exists socketWrState($stateArg(socketinfo))]
&& $socketWrState($stateArg(socketinfo)) ni {Wready peNding}
} {
lappend InFlightW $socketWrState($stateArg(socketinfo))
} elseif {($doing eq "write")} {
lappend InFlightW $tokenArg
}
# Report any inconsistency of $tokenArg with socket*state.
if { ($doing eq "read")
&& [info exists socketRdState($stateArg(socketinfo))]
&& ($tokenArg ne $socketRdState($stateArg(socketinfo)))
} {
Log WARNING - ReplayIfDead pipelined tokenArg $tokenArg $doing \
ne socketRdState($stateArg(socketinfo)) \
$socketRdState($stateArg(socketinfo))
} elseif {
($doing eq "write")
&& [info exists socketWrState($stateArg(socketinfo))]
&& ($tokenArg ne $socketWrState($stateArg(socketinfo)))
} {
Log WARNING - ReplayIfDead pipelined tokenArg $tokenArg $doing \
ne socketWrState($stateArg(socketinfo)) \
$socketWrState($stateArg(socketinfo))
}
} else {
# One transaction should be in flight.
# socketRdState, socketWrQueue are used.
# socketRdQueue should be empty.
# Report any inconsistency of $tokenArg with socket*state.
if {$tokenArg ne $socketRdState($stateArg(socketinfo))} {
Log WARNING - ReplayIfDead nonpipeline tokenArg $tokenArg $doing \
ne socketRdState($stateArg(socketinfo)) \
$socketRdState($stateArg(socketinfo))
}
# Report the inconsistency that socketRdQueue is non-empty.
if { [info exists socketRdQueue($stateArg(socketinfo))]
&& ($socketRdQueue($stateArg(socketinfo)) ne {})
} {
Log WARNING - ReplayIfDead nonpipeline tokenArg $tokenArg $doing \
has read queue socketRdQueue($stateArg(socketinfo)) \
$socketRdQueue($stateArg(socketinfo)) ne {}
}
lappend InFlightW $socketRdState($stateArg(socketinfo))
set socketRdQueue($stateArg(socketinfo)) {}
}
set newQueue {}
lappend newQueue {*}$InFlightR
lappend newQueue {*}$socketRdQueue($stateArg(socketinfo))
lappend newQueue {*}$InFlightW
lappend newQueue {*}$socketWrQueue($stateArg(socketinfo))
# 2. Tidy up tokenArg. This is a cut-down form of Finish/CloseSocket.
# Do not change state(status).
# No need to after cancel stateArg(after) - either this is done in
# ReplayCore/ReInit, or Finish is called.
catch {close $stateArg(sock)}
# 2a. Tidy the tokens in the queues - this is done in ReplayCore/ReInit.
# - Transactions, if any, that are awaiting responses cannot be completed.
# They are listed for re-sending in newQueue.
# - All tokens are preserved for re-use by ReplayCore, and their variables
# will be re-initialised by calls to ReInit.
# - The relevant element of socketMapping, socketRdState, socketWrState,
# socketRdQueue, socketWrQueue, socketClosing, socketPlayCmd will be set
# to new values in ReplayCore.
ReplayCore $newQueue
}
# http::ReplayIfClose --
#
# A request on a socket that was previously "Connection: keep-alive" has
# received a "Connection: close" response header. The server supplies
# that response correctly, but any later requests already queued on this
# connection will be lost when the socket closes.
#
# This command takes arguments that represent the socketWrState,
# socketRdQueue and socketWrQueue for this connection. The socketRdState
# is not needed because the server responds in full to the request that
# received the "Connection: close" response header.
#
# Existing request tokens $token (::http::$n) are preserved. The caller
# will be unaware that the request was processed this way.
proc http::ReplayIfClose {Wstate Rqueue Wqueue} {
Log running http::ReplayIfClose for $Wstate $Rqueue $Wqueue
if {$Wstate in $Rqueue || $Wstate in $Wqueue} {
Log WARNING duplicate token in http::ReplayIfClose - token $Wstate
set Wstate Wready
}
# 1. Create newQueue
set InFlightW {}
if {$Wstate ni {Wready peNding}} {
lappend InFlightW $Wstate
}
set newQueue {}
lappend newQueue {*}$Rqueue
lappend newQueue {*}$InFlightW
lappend newQueue {*}$Wqueue
# 2. Cleanup - none needed, done by the caller.
ReplayCore $newQueue
}
# http::ReInit --
#
# Command to restore a token's state to a condition that
# makes it ready to replay a request.
#
# Command http::geturl stores extra state in state(tmp*) so
# we don't need to do the argument processing again.
#
# The caller must:
# - Set state(reusing) and state(sock) to their new values after calling
# this command.
# - Unset state(tmpState), state(tmpOpenCmd) if future calls to ReplayCore
# or ReInit are inappropriate for this token. Typically only one retry
# is allowed.
# The caller may also unset state(tmpConnArgs) if this value (and the
# token) will be used immediately. The value is needed by tokens that
# will be stored in a queue.
#
# Arguments:
# token Connection token.
#
# Return Value: (boolean) true iff the re-initialisation was successful.
proc http::ReInit {token} {
variable $token
upvar 0 $token state
if {!(
[info exists state(tmpState)]
&& [info exists state(tmpOpenCmd)]
&& [info exists state(tmpConnArgs)]
)
} {
Log FAILED in http::ReInit via ReplayCore - NO tmp vars for $token
return 0
}
if {[info exists state(after)]} {
after cancel $state(after)
unset state(after)
}
# Don't alter state(status) - this would trigger http::wait if it is in use.
set tmpState $state(tmpState)
set tmpOpenCmd $state(tmpOpenCmd)
set tmpConnArgs $state(tmpConnArgs)
foreach name [array names state] {
if {$name ne "status"} {
unset state($name)
}
}
# Don't alter state(status).
# Restore state(tmp*) - the caller may decide to unset them.
# Restore state(tmpConnArgs) which is needed for connection.
# state(tmpState), state(tmpOpenCmd) are needed only for retries.
dict unset tmpState status
array set state $tmpState
set state(tmpState) $tmpState
set state(tmpOpenCmd) $tmpOpenCmd
set state(tmpConnArgs) $tmpConnArgs
return 1
}
# http::ReplayCore --
#
# Command to replay a list of requests, using existing connection tokens.
#
# Abstracted from http::geturl which stores extra state in state(tmp*) so
# we don't need to do the argument processing again.
#
# Arguments:
# newQueue List of connection tokens.
#
# Side Effects:
# Use existing tokens, but try to open a new socket.
proc http::ReplayCore {newQueue} {
variable socketMapping
variable socketRdState
variable socketWrState
variable socketRdQueue
variable socketWrQueue
variable socketClosing
variable socketPlayCmd
if {[llength $newQueue] == 0} {
# Nothing to do.
return
}
##Log running ReplayCore for {*}$newQueue
set newToken [lindex $newQueue 0]
set newQueue [lrange $newQueue 1 end]
# 3. Use newToken, and restore its values of state(*). Do not restore
# elements tmp* - we try again only once.
set token $newToken
variable $token
upvar 0 $token state
if {![ReInit $token]} {
Log FAILED in http::ReplayCore - NO tmp vars
Finish $token {cannot send this request again}
return
}
set tmpState $state(tmpState)
set tmpOpenCmd $state(tmpOpenCmd)
set tmpConnArgs $state(tmpConnArgs)
unset state(tmpState)
unset state(tmpOpenCmd)
unset state(tmpConnArgs)
set state(reusing) 0
if {$state(-timeout) > 0} {
set resetCmd [list http::reset $token timeout]
set state(after) [after $state(-timeout) $resetCmd]
}
set pre [clock milliseconds]
##Log pre socket opened, - token $token
##Log $tmpOpenCmd - token $token
# 4. Open a socket.
if {[catch {eval $tmpOpenCmd} sock]} {
# Something went wrong while trying to establish the connection.
Log FAILED - $sock
set state(sock) NONE
Finish $token $sock
return
}
##Log post socket opened, - token $token
set delay [expr {[clock milliseconds] - $pre}]
if {$delay > 3000} {
Log socket delay $delay - token $token
}
# Command [socket] is called with -async, but takes 5s to 5.1s to return,
# with probability of order 1 in 10,000. This may be a bizarre scheduling
# issue with my (KJN's) system (Fedora Linux).
# This does not cause a problem (unless the request times out when this
# command returns).
# 5. Configure the persistent socket data.
if {$state(-keepalive)} {
set socketMapping($state(socketinfo)) $sock
if {![info exists socketRdState($state(socketinfo))]} {
set socketRdState($state(socketinfo)) {}
set varName ::http::socketRdState($state(socketinfo))
trace add variable $varName unset ::http::CancelReadPipeline
}
if {![info exists socketWrState($state(socketinfo))]} {
set socketWrState($state(socketinfo)) {}
set varName ::http::socketWrState($state(socketinfo))
trace add variable $varName unset ::http::CancelWritePipeline
}
if {$state(-pipeline)} {
#Log new, init for pipelined, GRANT write acc to $token ReplayCore
set socketRdState($state(socketinfo)) $token
set socketWrState($state(socketinfo)) $token
} else {
#Log new, init for nonpipeline, GRANT r/w acc to $token ReplayCore
set socketRdState($state(socketinfo)) $token
set socketWrState($state(socketinfo)) $token
}
set socketRdQueue($state(socketinfo)) {}
set socketWrQueue($state(socketinfo)) $newQueue
set socketClosing($state(socketinfo)) 0
set socketPlayCmd($state(socketinfo)) {ReplayIfClose Wready {} {}}
}
##Log pre newQueue ReInit, - token $token
# 6. Configure sockets in the queue.
foreach tok $newQueue {
if {[ReInit $tok]} {
set ${tok}(reusing) 1
set ${tok}(sock) $sock
} else {
set ${tok}(reusing) 1
set ${tok}(sock) NONE
Finish $token {cannot send this request again}
}
}
# 7. Configure the socket for newToken to send a request.
set state(sock) $sock
Log "Using $sock for $state(socketinfo) - token $token" \
[expr {$state(-keepalive)?"keepalive":""}]
# Initialisation of a new socket.
##Log socket opened, now fconfigure - token $token
fconfigure $sock -translation {auto crlf} -buffersize $state(-blocksize)
##Log socket opened, DONE fconfigure - token $token
# Connect does its own fconfigure.
fileevent $sock writable [list http::Connect $token {*}$tmpConnArgs]
#Log ---- $sock << conn to $token for HTTP request (e)
}
# Data access functions:
# Data - the URL data
# Status - the transaction status: ok, reset, eof, timeout, error
# Code - the HTTP transaction code, e.g., 200
# Size - the size of the URL data
proc http::data {token} {
variable $token
upvar 0 $token state
return $state(body)
}
proc http::status {token} {
if {![info exists $token]} {
return "error"
}
variable $token
upvar 0 $token state
return $state(status)
}
proc http::code {token} {
variable $token
upvar 0 $token state
return $state(http)
}
proc http::ncode {token} {
variable $token
upvar 0 $token state
if {[regexp {[0-9]{3}} $state(http) numeric_code]} {
return $numeric_code
} else {
return $state(http)
}
}
proc http::size {token} {
variable $token
upvar 0 $token state
return $state(currentsize)
}
proc http::meta {token} {
variable $token
upvar 0 $token state
return $state(meta)
}
proc http::error {token} {
variable $token
upvar 0 $token state
if {[info exists state(error)]} {
return $state(error)
}
return ""
}
# http::cleanup
#
# Garbage collect the state associated with a transaction
#
# Arguments
# token The token returned from http::geturl
#
# Side Effects
# unsets the state array
proc http::cleanup {token} {
variable $token
upvar 0 $token state
if {[info commands ${token}EventCoroutine] ne {}} {
rename ${token}EventCoroutine {}
}
if {[info exists state(after)]} {
after cancel $state(after)
unset state(after)
}
if {[info exists state]} {
unset state
}
}
# http::Connect
#
# This callback is made when an asyncronous connection completes.
#
# Arguments
# token The token returned from http::geturl
#
# Side Effects
# Sets the status of the connection, which unblocks
# the waiting geturl call
proc http::Connect {token proto phost srvurl} {
variable $token
upvar 0 $token state
set tk [namespace tail $token]
set err "due to unexpected EOF"
if {
[eof $state(sock)] ||
[set err [fconfigure $state(sock) -error]] ne ""
} {
Log "WARNING - if testing, pay special attention to this\
case (GJ) which is seldom executed - token $token"
if {[info exists state(reusing)] && $state(reusing)} {
# The socket was closed at the server end, and closed at
# this end by http::CheckEof.
if {[TestForReplay $token write $err b]} {
return
}
# else:
# This is NOT a persistent socket that has been closed since its
# last use.
# If any other requests are in flight or pipelined/queued, they will
# be discarded.
}
Finish $token "connect failed $err"
} else {
set state(state) connecting
fileevent $state(sock) writable {}
::http::Connected $token $proto $phost $srvurl
}
}
# http::Write
#
# Write POST query data to the socket
#
# Arguments
# token The token for the connection
#
# Side Effects
# Write the socket and handle callbacks.
proc http::Write {token} {
variable http
variable socketMapping
variable socketRdState
variable socketWrState
variable socketRdQueue
variable socketWrQueue
variable socketClosing
variable socketPlayCmd
variable $token
upvar 0 $token state
set tk [namespace tail $token]
set sock $state(sock)
# Output a block. Tcl will buffer this if the socket blocks
set done 0
if {[catch {
# Catch I/O errors on dead sockets
if {[info exists state(-query)]} {
# Chop up large query strings so queryprogress callback can give
# smooth feedback.
if { $state(queryoffset) + $state(-queryblocksize)
>= $state(querylength)
} {
# This will be the last puts for the request-body.
if { (![catch {fileevent $sock readable} binding])
&& ($binding eq [list http::CheckEof $sock])
} {
# Remove the "fileevent readable" binding of an idle
# persistent socket to http::CheckEof. We can no longer
# treat bytes received as junk. The server might still time
# out and half-close the socket if it has not yet received
# the first "puts".
fileevent $sock readable {}
}
}
puts -nonewline $sock \
[string range $state(-query) $state(queryoffset) \
[expr {$state(queryoffset) + $state(-queryblocksize) - 1}]]
incr state(queryoffset) $state(-queryblocksize)
if {$state(queryoffset) >= $state(querylength)} {
set state(queryoffset) $state(querylength)
set done 1
}
} else {
# Copy blocks from the query channel
set outStr [read $state(-querychannel) $state(-queryblocksize)]
if {[eof $state(-querychannel)]} {
# This will be the last puts for the request-body.
if { (![catch {fileevent $sock readable} binding])
&& ($binding eq [list http::CheckEof $sock])
} {
# Remove the "fileevent readable" binding of an idle
# persistent socket to http::CheckEof. We can no longer
# treat bytes received as junk. The server might still time
# out and half-close the socket if it has not yet received
# the first "puts".
fileevent $sock readable {}
}
}
puts -nonewline $sock $outStr
incr state(queryoffset) [string length $outStr]
if {[eof $state(-querychannel)]} {
set done 1
}
}
} err]} {
# Do not call Finish here, but instead let the read half of the socket
# process whatever server reply there is to get.
set state(posterror) $err
set done 1
}
if {$done} {
catch {flush $sock}
fileevent $sock writable {}
Log ^C$tk end sending request - token $token
# End of writing (POST method). The request has been sent.
DoneRequest $token
}
# Callback to the client after we've completely handled everything.
if {[string length $state(-queryprogress)]} {
eval $state(-queryprogress) \
[list $token $state(querylength) $state(queryoffset)]
}
}
# http::Event
#
# Handle input on the socket. This command is the core of
# the coroutine commands ${token}EventCoroutine that are
# bound to "fileevent $sock readable" and process input.
#
# Arguments
# sock The socket receiving input.
# token The token returned from http::geturl
#
# Side Effects
# Read the socket and handle callbacks.
proc http::Event {sock token} {
variable http
variable socketMapping
variable socketRdState
variable socketWrState
variable socketRdQueue
variable socketWrQueue
variable socketClosing
variable socketPlayCmd
variable $token
upvar 0 $token state
set tk [namespace tail $token]
while 1 {
yield
##Log Event call - token $token
if {![info exists state]} {
Log "Event $sock with invalid token '$token' - remote close?"
if {![eof $sock]} {
if {[set d [read $sock]] ne ""} {
Log "WARNING: additional data left on closed socket\
- token $token"
}
}
Log ^X$tk end of response (token error) - token $token
CloseSocket $sock
return
}
if {$state(state) eq "connecting"} {
##Log - connecting - token $token
if { $state(reusing)
&& $state(-pipeline)
&& ($state(-timeout) > 0)
&& (![info exists state(after)])
} {
set state(after) [after $state(-timeout) \
[list http::reset $token timeout]]
}
if {[catch {gets $sock state(http)} nsl]} {
Log "WARNING - if testing, pay special attention to this\
case (GK) which is seldom executed - token $token"
if {[info exists state(reusing)] && $state(reusing)} {
# The socket was closed at the server end, and closed at
# this end by http::CheckEof.
if {[TestForReplay $token read $nsl c]} {
return
}
# else:
# This is NOT a persistent socket that has been closed since
# its last use.
# If any other requests are in flight or pipelined/queued,
# they will be discarded.
} else {
Log ^X$tk end of response (error) - token $token
Finish $token $nsl
return
}
} elseif {$nsl >= 0} {
##Log - connecting 1 - token $token
set state(state) "header"
} elseif { [eof $sock]
&& [info exists state(reusing)]
&& $state(reusing)
} {
# The socket was closed at the server end, and we didn't notice.
# This is the first read - where the closure is usually first
# detected.
if {[TestForReplay $token read {} d]} {
return
}
# else:
# This is NOT a persistent socket that has been closed since its
# last use.
# If any other requests are in flight or pipelined/queued, they
# will be discarded.
}
} elseif {$state(state) eq "header"} {
if {[catch {gets $sock line} nhl]} {
##Log header failed - token $token
Log ^X$tk end of response (error) - token $token
Finish $token $nhl
return
} elseif {$nhl == 0} {
##Log header done - token $token
Log ^E$tk end of response headers - token $token
# We have now read all headers
# We ignore HTTP/1.1 100 Continue returns. RFC2616 sec 8.2.3
if { ($state(http) == "")
|| ([regexp {^\S+\s(\d+)} $state(http) {} x] && $x == 100)
} {
set state(state) "connecting"
continue
# This was a "return" in the pre-coroutine code.
}
if { ([info exists state(connection)])
&& ([info exists socketMapping($state(socketinfo))])
&& ($state(connection) eq "keep-alive")
&& ($state(-keepalive))
&& (!$state(reusing))
&& ($state(-pipeline))
} {
# Response headers received for first request on a
# persistent socket. Now ready for pipelined writes (if
# any).
# Previous value is $token. It cannot be "pending".
set socketWrState($state(socketinfo)) Wready
http::NextPipelinedWrite $token
}
# Once a "close" has been signaled, the client MUST NOT send any
# more requests on that connection.
#
# If either the client or the server sends the "close" token in
# the Connection header, that request becomes the last one for
# the connection.
if { ([info exists state(connection)])
&& ([info exists socketMapping($state(socketinfo))])
&& ($state(connection) eq "close")
&& ($state(-keepalive))
} {
# The server warns that it will close the socket after this
# response.
##Log WARNING - socket will close after response for $token
# Prepare data for a call to ReplayIfClose.
if { ($socketRdQueue($state(socketinfo)) ne {})
|| ($socketWrQueue($state(socketinfo)) ne {})
|| ($socketWrState($state(socketinfo)) ni
[list Wready peNding $token])
} {
set InFlightW $socketWrState($state(socketinfo))
if {$InFlightW in [list Wready peNding $token]} {
set InFlightW Wready
} else {
set msg "token ${InFlightW} is InFlightW"
##Log $msg - token $token
}
set socketPlayCmd($state(socketinfo)) \
[list ReplayIfClose $InFlightW \
$socketRdQueue($state(socketinfo)) \
$socketWrQueue($state(socketinfo))]
# - All tokens are preserved for re-use by ReplayCore.
# - Queues are preserved in case of Finish with error,
# but are not used for anything else because
# socketClosing(*) is set below.
# - Cancel the state(after) timeout events.
foreach tokenVal $socketRdQueue($state(socketinfo)) {
if {[info exists ${tokenVal}(after)]} {
after cancel [set ${tokenVal}(after)]
unset ${tokenVal}(after)
}
}
} else {
set socketPlayCmd($state(socketinfo)) \
{ReplayIfClose Wready {} {}}
}
# Do not allow further connections on this socket.
set socketClosing($state(socketinfo)) 1
}
set state(state) body
# If doing a HEAD, then we won't get any body
if {$state(-validate)} {
Log ^F$tk end of response for HEAD request - token $token
set state(state) complete
Eot $token
return
}
# - For non-chunked transfer we may have no body - in this case
# we may get no further file event if the connection doesn't
# close and no more data is sent. We can tell and must finish
# up now - not later - the alternative would be to wait until
# the server times out.
# - In this case, the server has NOT told the client it will
# close the connection, AND it has NOT indicated the resource
# length EITHER by setting the Content-Length (totalsize) OR
# by using chunked Transfer-Encoding.
# - Do not worry here about the case (Connection: close) because
# the server should close the connection.
# - IF (NOT Connection: close) AND (NOT chunked encoding) AND
# (totalsize == 0).
if { (!( [info exists state(connection)]
&& ($state(connection) eq "close")
)
)
&& (![info exists state(transfer)])
&& ($state(totalsize) == 0)
} {
set msg {body size is 0 and no events likely - complete}
Log "$msg - token $token"
set msg {(length unknown, set to 0)}
Log ^F$tk end of response body {*}$msg - token $token
set state(state) complete
Eot $token
return
}
# We have to use binary translation to count bytes properly.
lassign [fconfigure $sock -translation] trRead trWrite
fconfigure $sock -translation [list binary $trWrite]
if {
$state(-binary) || [IsBinaryContentType $state(type)]
} {
# Turn off conversions for non-text data.
set state(binary) 1
}
if {[info exists state(-channel)]} {
if {$state(binary) || [llength [ContentEncoding $token]]} {
fconfigure $state(-channel) -translation binary
}
if {![info exists state(-handler)]} {
# Initiate a sequence of background fcopies.
fileevent $sock readable {}
rename ${token}EventCoroutine {}
CopyStart $sock $token
return
}
}
} elseif {$nhl > 0} {
# Process header lines.
##Log header - token $token - $line
if {[regexp -nocase {^([^:]+):(.+)$} $line x key value]} {
switch -- [string tolower $key] {
content-type {
set state(type) [string trim [string tolower $value]]
# Grab the optional charset information.
if {[regexp -nocase \
{charset\s*=\s*\"((?:[^""]|\\\")*)\"} \
$state(type) -> cs]} {
set state(charset) [string map {{\"} \"} $cs]
} else {
regexp -nocase {charset\s*=\s*(\S+?);?} \
$state(type) -> state(charset)
}
}
content-length {
set state(totalsize) [string trim $value]
}
content-encoding {
set state(coding) [string trim $value]
}
transfer-encoding {
set state(transfer) \
[string trim [string tolower $value]]
}
proxy-connection -
connection {
set tmpHeader [string trim [string tolower $value]]
# RFC 7230 Section 6.1 states that a comma-separated
# list is an acceptable value. According to
# https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Connection
# any comma-separated list implies keep-alive, but I
# don't see this in the RFC so we'll play safe and
# scan any list for "close".
if {$tmpHeader in {close keep-alive}} {
# The common cases, continue.
} elseif {[string first , $tmpHeader] < 0} {
# Not a comma-separated list, not "close",
# therefore "keep-alive".
set tmpHeader keep-alive
} else {
set tmpResult keep-alive
set tmpCsl [split $tmpHeader ,]
# Optional whitespace either side of separator.
foreach el $tmpCsl {
if {[string trim $el] eq {close}} {
set tmpResult close
break
}
}
set tmpHeader $tmpResult
}
set state(connection) $tmpHeader
}
}
lappend state(meta) $key [string trim $value]
}
}
} else {
# Now reading body
##Log body - token $token
if {[catch {
if {[info exists state(-handler)]} {
set n [eval $state(-handler) [list $sock $token]]
##Log handler $n - token $token
# N.B. the protocol has been set to 1.0 because the -handler
# logic is not expected to handle chunked encoding.
# FIXME Allow -handler with 1.1 on dechunked stacked chan.
if {$state(totalsize) == 0} {
# We know the transfer is complete only when the server
# closes the connection - i.e. eof is not an error.
set state(state) complete
}
if {![string is integer -strict $n]} {
if 1 {
# Do not tolerate bad -handler - fail with error
# status.
set msg {the -handler command for http::geturl must\
return an integer (the number of bytes\
read)}
Log ^X$tk end of response (handler error) -\
token $token
Eot $token $msg
} else {
# Tolerate the bad -handler, and continue. The
# penalty:
# (a) Because the handler returns nonsense, we know
# the transfer is complete only when the server
# closes the connection - i.e. eof is not an
# error.
# (b) http::size will not be accurate.
# (c) The transaction is already downgraded to 1.0
# to avoid chunked transfer encoding. It MUST
# also be forced to "Connection: close" or the
# HTTP/1.0 equivalent; or it MUST fail (as
# above) if the server sends
# "Connection: keep-alive" or the HTTP/1.0
# equivalent.
set n 0
set state(state) complete
}
}
} elseif {[info exists state(transfer_final)]} {
# This code forgives EOF in place of the final CRLF.
set line [getTextLine $sock]
set n [string length $line]
set state(state) complete
if {$n > 0} {
# - HTTP trailers (late response headers) are permitted
# by Chunked Transfer-Encoding, and can be safely
# ignored.
# - Do not count these bytes in the total received for
# the response body.
Log "trailer of $n bytes after final chunk -\
token $token"
append state(transfer_final) $line
set n 0
} else {
Log ^F$tk end of response body (chunked) - token $token
Log "final chunk part - token $token"
Eot $token
}
} elseif { [info exists state(transfer)]
&& ($state(transfer) eq "chunked")
} {
##Log chunked - token $token
set size 0
set hexLenChunk [getTextLine $sock]
#set ntl [string length $hexLenChunk]
if {[string trim $hexLenChunk] ne ""} {
scan $hexLenChunk %x size
if {$size != 0} {
##Log chunk-measure $size - token $token
set chunk [BlockingRead $sock $size]
set n [string length $chunk]
if {$n >= 0} {
append state(body) $chunk
incr state(log_size) [string length $chunk]
##Log chunk $n cumul $state(log_size) -\
token $token
}
if {$size != [string length $chunk]} {
Log "WARNING: mis-sized chunk:\
was [string length $chunk], should be\
$size - token $token"
set n 0
set state(connection) close
Log ^X$tk end of response (chunk error) \
- token $token
set msg {error in chunked encoding - fetch\
terminated}
Eot $token $msg
}
# CRLF that follows chunk.
# If eof, this is handled at the end of this proc.
getTextLine $sock
} else {
set n 0
set state(transfer_final) {}
}
} else {
# Line expected to hold chunk length is empty, or eof.
##Log bad-chunk-measure - token $token
set n 0
set state(connection) close
Log ^X$tk end of response (chunk error) - token $token
Eot $token {error in chunked encoding -\
fetch terminated}
}
} else {
##Log unchunked - token $token
if {$state(totalsize) == 0} {
# We know the transfer is complete only when the server
# closes the connection.
set state(state) complete
set reqSize $state(-blocksize)
} else {
# Ask for the whole of the unserved response-body.
# This works around a problem with a tls::socket - for
# https in keep-alive mode, and a request for
# $state(-blocksize) bytes, the last part of the
# resource does not get read until the server times out.
set reqSize [expr { $state(totalsize)
- $state(currentsize)}]
# The workaround fails if reqSize is
# capped at $state(-blocksize).
# set reqSize [expr {min($reqSize, $state(-blocksize))}]
}
set c $state(currentsize)
set t $state(totalsize)
##Log non-chunk currentsize $c of totalsize $t -\
token $token
set block [read $sock $reqSize]
set n [string length $block]
if {$n >= 0} {
append state(body) $block
##Log non-chunk [string length $state(body)] -\
token $token
}
}
# This calculation uses n from the -handler, chunked, or
# unchunked case as appropriate.
if {[info exists state]} {
if {$n >= 0} {
incr state(currentsize) $n
set c $state(currentsize)
set t $state(totalsize)
##Log another $n currentsize $c totalsize $t -\
token $token
}
# If Content-Length - check for end of data.
if {
($state(totalsize) > 0)
&& ($state(currentsize) >= $state(totalsize))
} {
Log ^F$tk end of response body (unchunked) -\
token $token
set state(state) complete
Eot $token
}
}
} err]} {
Log ^X$tk end of response (error ${err}) - token $token
Finish $token $err
return
} else {
if {[info exists state(-progress)]} {
eval $state(-progress) \
[list $token $state(totalsize) $state(currentsize)]
}
}
}
# catch as an Eot above may have closed the socket already
# $state(state) may be connecting, header, body, or complete
if {![set cc [catch {eof $sock} eof]] && $eof} {
##Log eof - token $token
if {[info exists $token]} {
set state(connection) close
if {$state(state) eq "complete"} {
# This includes all cases in which the transaction
# can be completed by eof.
# The value "complete" is set only in http::Event, and it is
# used only in the test above.
Log ^F$tk end of response body (unchunked, eof) -\
token $token
Eot $token
} else {
# Premature eof.
Log ^X$tk end of response (unexpected eof) - token $token
Eot $token eof
}
} else {
# open connection closed on a token that has been cleaned up.
Log ^X$tk end of response (token error) - token $token
CloseSocket $sock
}
} elseif {$cc} {
return
}
}
}
# http::TestForReplay
#
# Command called if eof is discovered when a socket is first used for a
# new transaction. Typically this occurs if a persistent socket is used
# after a period of idleness and the server has half-closed the socket.
#
# token - the connection token returned by http::geturl
# doing - "read" or "write"
# err - error message, if any
# caller - code to identify the caller - used only in logging
#
# Return Value: boolean, true iff the command calls http::ReplayIfDead.
proc http::TestForReplay {token doing err caller} {
variable http
variable $token
upvar 0 $token state
set tk [namespace tail $token]
if {$doing eq "read"} {
set code Q
set action response
set ing reading
} else {
set code P
set action request
set ing writing
}
if {$err eq {}} {
set err "detect eof when $ing (server timed out?)"
}
if {$state(method) eq "POST" && !$http(-repost)} {
# No Replay.
# The present transaction will end when Finish is called.
# That call to Finish will abort any other transactions
# currently in the write queue.
# For calls from http::Event this occurs when execution
# reaches the code block at the end of that proc.
set msg {no retry for POST with http::config -repost 0}
Log reusing socket failed "($caller)" - $msg - token $token
Log error - $err - token $token
Log ^X$tk end of $action (error) - token $token
return 0
} else {
# Replay.
set msg {try a new socket}
Log reusing socket failed "($caller)" - $msg - token $token
Log error - $err - token $token
Log ^$code$tk Any unfinished (incl this one) failed - token $token
ReplayIfDead $token $doing
return 1
}
}
# http::IsBinaryContentType --
#
# Determine if the content-type means that we should definitely transfer
# the data as binary. [Bug 838e99a76d]
#
# Arguments
# type The content-type of the data.
#
# Results:
# Boolean, true if we definitely should be binary.
proc http::IsBinaryContentType {type} {
lassign [split [string tolower $type] "/;"] major minor
if {$major eq "text"} {
return false
}
# There's a bunch of XML-as-application-format things about. See RFC 3023
# and so on.
if {$major eq "application"} {
set minor [string trimright $minor]
if {$minor in {"json" "xml" "xml-external-parsed-entity" "xml-dtd"}} {
return false
}
}
# Not just application/foobar+xml but also image/svg+xml, so let us not
# restrict things for now...
if {[string match "*+xml" $minor]} {
return false
}
return true
}
# http::getTextLine --
#
# Get one line with the stream in crlf mode.
# Used if Transfer-Encoding is chunked.
# Empty line is not distinguished from eof. The caller must
# be able to handle this.
#
# Arguments
# sock The socket receiving input.
#
# Results:
# The line of text, without trailing newline
proc http::getTextLine {sock} {
set tr [fconfigure $sock -translation]
lassign $tr trRead trWrite
fconfigure $sock -translation [list crlf $trWrite]
set r [BlockingGets $sock]
fconfigure $sock -translation $tr
return $r
}
# http::BlockingRead
#
# Replacement for a blocking read.
# The caller must be a coroutine.
proc http::BlockingRead {sock size} {
if {$size < 1} {
return
}
set result {}
while 1 {
set need [expr {$size - [string length $result]}]
set block [read $sock $need]
set eof [eof $sock]
append result $block
if {[string length $result] >= $size || $eof} {
return $result
} else {
yield
}
}
}
# http::BlockingGets
#
# Replacement for a blocking gets.
# The caller must be a coroutine.
# Empty line is not distinguished from eof. The caller must
# be able to handle this.
proc http::BlockingGets {sock} {
while 1 {
set count [gets $sock line]
set eof [eof $sock]
if {$count > -1 || $eof} {
return $line
} else {
yield
}
}
}
# http::CopyStart
#
# Error handling wrapper around fcopy
#
# Arguments
# sock The socket to copy from
# token The token returned from http::geturl
#
# Side Effects
# This closes the connection upon error
proc http::CopyStart {sock token {initial 1}} {
upvar #0 $token state
if {[info exists state(transfer)] && $state(transfer) eq "chunked"} {
foreach coding [ContentEncoding $token] {
lappend state(zlib) [zlib stream $coding]
}
make-transformation-chunked $sock [namespace code [list CopyChunk $token]]
} else {
if {$initial} {
foreach coding [ContentEncoding $token] {
zlib push $coding $sock
}
}
if {[catch {
# FIXME Keep-Alive on https tls::socket with unchunked transfer
# hangs until the server times out. A workaround is possible, as for
# the case without -channel, but it does not use the neat "fcopy"
# solution.
fcopy $sock $state(-channel) -size $state(-blocksize) -command \
[list http::CopyDone $token]
} err]} {
Finish $token $err
}
}
}
proc http::CopyChunk {token chunk} {
upvar 0 $token state
if {[set count [string length $chunk]]} {
incr state(currentsize) $count
if {[info exists state(zlib)]} {
foreach stream $state(zlib) {
set chunk [$stream add $chunk]
}
}
puts -nonewline $state(-channel) $chunk
if {[info exists state(-progress)]} {
eval [linsert $state(-progress) end \
$token $state(totalsize) $state(currentsize)]
}
} else {
Log "CopyChunk Finish - token $token"
if {[info exists state(zlib)]} {
set excess ""
foreach stream $state(zlib) {
catch {set excess [$stream add -finalize $excess]}
}
puts -nonewline $state(-channel) $excess
foreach stream $state(zlib) { $stream close }
unset state(zlib)
}
Eot $token ;# FIX ME: pipelining.
}
}
# http::CopyDone
#
# fcopy completion callback
#
# Arguments
# token The token returned from http::geturl
# count The amount transfered
#
# Side Effects
# Invokes callbacks
proc http::CopyDone {token count {error {}}} {
variable $token
upvar 0 $token state
set sock $state(sock)
incr state(currentsize) $count
if {[info exists state(-progress)]} {
eval $state(-progress) \
[list $token $state(totalsize) $state(currentsize)]
}
# At this point the token may have been reset.
if {[string length $error]} {
Finish $token $error
} elseif {[catch {eof $sock} iseof] || $iseof} {
Eot $token
} else {
CopyStart $sock $token 0
}
}
# http::Eot
#
# Called when either:
# a. An eof condition is detected on the socket.
# b. The client decides that the response is complete.
# c. The client detects an inconsistency and aborts the transaction.
#
# Does:
# 1. Set state(status)
# 2. Reverse any Content-Encoding
# 3. Convert charset encoding and line ends if necessary
# 4. Call http::Finish
#
# Arguments
# token The token returned from http::geturl
# force (previously) optional, has no effect
# reason - "eof" means premature EOF (not EOF as the natural end of
# the response)
# - "" means completion of response, with or without EOF
# - anything else describes an error confition other than
# premature EOF.
#
# Side Effects
# Clean up the socket
proc http::Eot {token {reason {}}} {
variable $token
upvar 0 $token state
if {$reason eq "eof"} {
# Premature eof.
set state(status) eof
set reason {}
} elseif {$reason ne ""} {
# Abort the transaction.
set state(status) $reason
} else {
# The response is complete.
set state(status) ok
}
if {[string length $state(body)] > 0} {
if {[catch {
foreach coding [ContentEncoding $token] {
set state(body) [zlib $coding $state(body)]
}
} err]} {
Log "error doing decompression for token $token: $err"
Finish $token $err
return
}
if {!$state(binary)} {
# If we are getting text, set the incoming channel's encoding
# correctly. iso8859-1 is the RFC default, but this could be any
# IANA charset. However, we only know how to convert what we have
# encodings for.
set enc [CharsetToEncoding $state(charset)]
if {$enc ne "binary"} {
set state(body) [encoding convertfrom $enc $state(body)]
}
# Translate text line endings.
set state(body) [string map {\r\n \n \r \n} $state(body)]
}
}
Finish $token $reason
}
# http::wait --
#
# See documentation for details.
#
# Arguments:
# token Connection token.
#
# Results:
# The status after the wait.
proc http::wait {token} {
variable $token
upvar 0 $token state
if {![info exists state(status)] || $state(status) eq ""} {
# We must wait on the original variable name, not the upvar alias
vwait ${token}(status)
}
return [status $token]
}
# http::formatQuery --
#
# See documentation for details. Call http::formatQuery with an even
# number of arguments, where the first is a name, the second is a value,
# the third is another name, and so on.
#
# Arguments:
# args A list of name-value pairs.
#
# Results:
# TODO
proc http::formatQuery {args} {
if {[llength $args] % 2} {
return \
-code error \
-errorcode [list HTTP BADARGCNT $args] \
{Incorrect number of arguments, must be an even number.}
}
set result ""
set sep ""
foreach i $args {
append result $sep [mapReply $i]
if {$sep eq "="} {
set sep &
} else {
set sep =
}
}
return $result
}
# http::mapReply --
#
# Do x-www-urlencoded character mapping
#
# Arguments:
# string The string the needs to be encoded
#
# Results:
# The encoded string
proc http::mapReply {string} {
variable http
variable formMap
# The spec says: "non-alphanumeric characters are replaced by '%HH'". Use
# a pre-computed map and [string map] to do the conversion (much faster
# than [regsub]/[subst]). [Bug 1020491]
if {$http(-urlencoding) ne ""} {
set string [encoding convertto $http(-urlencoding) $string]
return [string map $formMap $string]
}
set converted [string map $formMap $string]
if {[string match "*\[\u0100-\uffff\]*" $converted]} {
regexp "\[\u0100-\uffff\]" $converted badChar
# Return this error message for maximum compatibility... :^/
return -code error \
"can't read \"formMap($badChar)\": no such element in array"
}
return $converted
}
interp alias {} http::quoteString {} http::mapReply
# http::ProxyRequired --
# Default proxy filter.
#
# Arguments:
# host The destination host
#
# Results:
# The current proxy settings
proc http::ProxyRequired {host} {
variable http
if {[info exists http(-proxyhost)] && [string length $http(-proxyhost)]} {
if {
![info exists http(-proxyport)] ||
![string length $http(-proxyport)]
} {
set http(-proxyport) 8080
}
return [list $http(-proxyhost) $http(-proxyport)]
}
}
# http::CharsetToEncoding --
#
# Tries to map a given IANA charset to a tcl encoding. If no encoding
# can be found, returns binary.
#
proc http::CharsetToEncoding {charset} {
variable encodings
set charset [string tolower $charset]
if {[regexp {iso-?8859-([0-9]+)} $charset -> num]} {
set encoding "iso8859-$num"
} elseif {[regexp {iso-?2022-(jp|kr)} $charset -> ext]} {
set encoding "iso2022-$ext"
} elseif {[regexp {shift[-_]?js} $charset]} {
set encoding "shiftjis"
} elseif {[regexp {(?:windows|cp)-?([0-9]+)} $charset -> num]} {
set encoding "cp$num"
} elseif {$charset eq "us-ascii"} {
set encoding "ascii"
} elseif {[regexp {(?:iso-?)?lat(?:in)?-?([0-9]+)} $charset -> num]} {
switch -- $num {
5 {set encoding "iso8859-9"}
1 - 2 - 3 {
set encoding "iso8859-$num"
}
}
} else {
# other charset, like euc-xx, utf-8,... may directly map to encoding
set encoding $charset
}
set idx [lsearch -exact $encodings $encoding]
if {$idx >= 0} {
return $encoding
} else {
return "binary"
}
}
# Return the list of content-encoding transformations we need to do in order.
proc http::ContentEncoding {token} {
upvar 0 $token state
set r {}
if {[info exists state(coding)]} {
foreach coding [split $state(coding) ,] {
switch -exact -- $coding {
deflate { lappend r inflate }
gzip - x-gzip { lappend r gunzip }
compress - x-compress { lappend r decompress }
identity {}
default {
return -code error "unsupported content-encoding \"$coding\""
}
}
}
}
return $r
}
proc http::ReceiveChunked {chan command} {
set data ""
set size -1
yield
while {1} {
chan configure $chan -translation {crlf binary}
while {[gets $chan line] < 1} { yield }
chan configure $chan -translation {binary binary}
if {[scan $line %x size] != 1} {
return -code error "invalid size: \"$line\""
}
set chunk ""
while {$size && ![chan eof $chan]} {
set part [chan read $chan $size]
incr size -[string length $part]
append chunk $part
}
if {[catch {
uplevel #0 [linsert $command end $chunk]
}]} {
http::Log "Error in callback: $::errorInfo"
}
if {[string length $chunk] == 0} {
# channel might have been closed in the callback
catch {chan event $chan readable {}}
return
}
}
}
proc http::make-transformation-chunked {chan command} {
coroutine [namespace current]::dechunk$chan ::http::ReceiveChunked $chan $command
chan event $chan readable [namespace current]::dechunk$chan
}
# Local variables:
# indent-tabs-mode: t
# End:
OHA YOOOO